Woodworking blog entries tagged with 'beds'

  • Advertise with us
View Chris Davis's profile

Chi Omega Dorm Room #7: Installed

07-14-2009 02:21 PM by Chris Davis | 6 comments »

This is the installation of the 17 beds in the Chi Omega house. These were installed in the third floor attic rooms. It all went fairly smooth. Everything fit together like it was suppose to, nothing got damaged on the way there, and we made good time, considering total travel time was 6 hours up there an back. We installed them in 5 hours with 5 people. We did have one problem, contractor wasn’t finished with the smaller room that was to house the 4 bookcase bunk beds. We assembled the...

Read this entry »

View Chris Davis's profile

Chi Omega Dorm Room #1: The Plan

06-08-2009 02:16 PM by Chris Davis | 2 comments »

I am building a total of 17 beds for the Chi Omega Sorority house. There will be 10 single beds and 7 bunks. These bed are a different design. The regular singles will have a 80” tall headboard with just a couple shelves. They will have 23” tall drawer units on one side and doors on the other side and the foot for larger storage. The bunks will be built with a solid panel on the foot and a headboard similar to the single beds. They will all be built from maple wood with just a clear...

Read this entry »

View woodshopbob's profile

My Bunk-bed project #1: Bunk bed

10-06-2007 04:59 AM by woodshopbob | 5 comments »

Well here goes another project! My oldest daughter asked if I could make the granddaughters a bunk-bed. So as usual dad is up to the challenge!! After three days of looking on the Internet for different bed styles I picked the one pictured below. We all approved this bed as the one best fit to the girls. So I purchased 6- 4×8 sheets of cabinet grade birch ply, 2- 4×8 sheets OSB, 1- 4×8 sheet Masonite board. We also bought several wood drawer pulls. The picture you see sh...

Read this entry »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics