LumberJocks

Woodworking blog entries tagged with 'ash'

  • Advertise with us
View Loogie's profile

Building a new workbench #3: Mortise & Tenon's are rought cut

02-06-2009 09:55 PM by Loogie | 5 comments »

I got to spend a few hours in the shop yesterday and I got the top planed although I discovered that one half of the top has developed a little twist. I’ll wait until it’s attached to the base and in position before I worry about hand planing it flat. I got the mortises chopped out and the tenons rough cut. Here’s where I sit now:

Read this entry »


View PurpLev's profile

Lumber #1: There can never be too much

02-06-2009 09:38 PM by PurpLev | 10 comments »

It seems like everytime someone says that he has “extra” lumber, or “more than enough” people jump to say that there can never be too much, as someone said: “there is no such thing is just enough, and too much is just right”. I came upon a shop that closed, and they were getting rid of their overstock lumber. I got too late for the 5/4 10’ pieces, but I did manage to get all their short stock (cut offs, leftovers): It’s mostly Mahogany, Ch...

Read this entry »


View Loogie's profile

Building a new workbench #1: The top is glued up and the components are rough cut

01-29-2009 10:28 PM by Loogie | 9 comments »

I’m in the process of building a new workbench based on Bob Lang's bench as detailed in the October 2008 issue of Popular Woodworking. I’ve read Christopher Schwarz book “Workbenches: From Design And Theory To Construction And Use” as well as several others. It always seemed like I wanted a combination of the features I found in most other benches. Bob Langs design was the first I’d seen that incorporated everything I wanted in a bench, so here goes! I bou...

Read this entry »


View TheCaver's profile

Child's Ash Bed #1: Legs and Footboard

01-05-2009 12:34 AM by TheCaver | 4 comments »

I didn’t start documenting the build for this until today as a few people from here and Facebook requested it (hence the extra info for non-woodworkers), so many steps have been skipped….including milling the parts from a huge 12 inch by 16 foot American White Ash board (I need another one for the headboard, luckily, my local supplier has a bunch of them and they are not selling well…good for me!) Not many people like Ash due to its white color (looks cheap) and splintery...

Read this entry »


View Etsy's profile

Handmade Portraits #1: Handmade Portraits: Wood Mosaics

09-26-2008 07:40 PM by Etsy | 4 comments »

Robin and Kathy Tucker of woodmosaics stopped working in town back in 1986. After Robin’s intricate wood-inlayed work was featured in The Best of Missouri Hands catalog and commissioned by Ralston Purina, they were on their way to full time crafting. Influenced by Amish quilt patterns, Robin’s excellent woodworking uses exotic natural woods that range from Satinwood from Sri Lanka to Purpleheart from Central and South America. All of the wood is completely natural, with only a cle...

Read this entry »


View James Lango's profile

Milling Cherry

09-22-2008 07:33 AM by James Lango | 8 comments »

Does anyone know what is the MAX width of certain hardwoods? The most accomodating to resist warp and cup? An old guy once told me that he was able to mill Elm 14” wide boards because Elm is very stable and resists warp/cup. Should you stick around the 4-6” range for Cherry? Or can you go wider?Different woods have certain characteristics and someone out there knows.. Any advice? thanks

Read this entry »


View pat's profile

Album Art #7

09-17-2008 11:18 PM by pat | 5 comments »

So far for the next entry in this woodburning series I pretty sure that I’m either going to burn Mettalica’s Death Magnetic album( thier great new album by the way, hit song the day that never comes) or Buckethead’s hit album Jumpman. Buckethead is pretty much one of most over looked guitarists of all time, if you haven’t heard him you should look him up, most of his stuff is intrumentals though. But anyway back to wood burning I guess I’ll let the readers decide...

Read this entry »


View Patrick Oughton's profile

Bending Solid Wood #1: Day one

09-17-2008 01:31 AM by Patrick Oughton | 5 comments »

For my third course at the “Centre for Fine Woodworking” here in New Zealand, I decided to try “Bending Solid Wood” – a two week course with the project being a stool designed for the course by the instructor, local furniture maker David Haig. David also teaches in Maine and a few other places around the US and Australia. The school is in Nelson – a truely awesome little city at the north end of the South Island.A winter morning in Nelson. Going into the...

Read this entry »


View martin007's profile

Holtzapffel workbench project #2: top and legs

09-03-2008 05:04 PM by martin007 | 2 comments »

I finally decided to build the Holtzapffel workbench. I have all legs and top parts milled, legs are glued, top pieces ready for glue up. top is ash and red oak, 3 inch thick 24 inch wide and 72 inch longlegs are red oak.vises jaws will be ash I have not decided yet on the layout of the top pieces, I have 6 peices of oak and 8 of ash, So like in the picture (hard to see) it might choose to be (from the front) 2 oak, 4 ash, 2 oak 4 ash 2 oak By the way this is my first ever pr...

Read this entry »


View pat's profile

Album Art #5

08-19-2008 06:12 PM by pat | 1 comment »

I just posted the Led Zeppelin and Him woodburned art. I am already wondering what I should do next. I was thinking Anthrax or maybe Cradle of Filth. If you have any ideas feel free to post them. Pat

Read this entry »


« prev 1 ... 66 67 68 69 70 71 72 ... 74 next »
733 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com