LumberJocks

Woodworking blog entries tagged with 'ash'

  • Advertise with us
View CFrye's profile

Hand tools #2: Stanley No. 116 Mitre Box rehab-first in-depth job

10-17-2016 08:38 AM by CFrye | 25 comments »

I picked up this little mitre box at a flea market back in August for $6. It came with a Warranted Superior backsaw with a bent back/plate and possibly a replacement handle? That’s another story. Out of all the tools that I have brought home to ‘save’ I’m not sure why this one jumped to the front of the rehab line. Maybe because it didn’t need sharpened. And I was pretty sure I wouldn’t be de-valuing it with refinishing (yeah, I watched a lot of Antiqu...

Read this entry »


View pjones46's profile

Building My Shop Before Retirement (the beginning) #2: Shop After Retirement #1

04-21-2011 08:35 AM by pjones46 | 25 comments »

Ok here we go. If you look back to the Beginning most of the walls were up but still lots to be done. This first shot is ater the exterior was completed, my litle truck and my other pal, Ivy. Overall size 24’ x 36’ with a full second floor. Two oversized doors 8’6” x 10’ for deliveries etc. and lots of natural light with oversized windows. My wife and I unload the trucks and push the wood up to the second floor. The next shots are of the second f...

Read this entry »


View jim1953's profile

Who Has Used White Ash

02-20-2010 05:52 AM by jim1953 | 24 comments »

Iam Going To Make My Daughters Kitchen Cabinets With White Ash But I Have Never Used Ash Before They Say It Looks Like Oak But It Is EasierTo Work With I Need Some Help Thanks

Read this entry »


View Dick, & Barb Cain's profile

Thorsen Table Challenge #4: The Dry Fit !

04-13-2007 01:34 AM by Dick, & Barb Cain | 23 comments »

Today I cut all the tenons, & dry fit the parts. “A lot more work to look forward to.” Now you can see the shape.

Read this entry »


View OregonBurls's profile

Finding & Discovering Nice figure In the Crotch Of A Tree

05-04-2010 06:32 AM by OregonBurls | 23 comments »

Hey everyone! I just finished this Video to teach the basics of discovering good figured wood.Hope you like it and would love your feed back and additions. ThanksGregOregonburls

Read this entry »


View degoose's profile

What happens when you cut with a drunken saw. #1: Sneak Peak

06-13-2009 01:46 AM by degoose | 22 comments »

Just a sneak peak of a new drunken weave board I am designing,, still in the prototype stages at this time but will continue with it until I am happy with it ..this is only a dry fit to see if the cuts are OK and what adjustments need to be made...

Read this entry »


View Ron Aylor's profile

• Two-Tier Side Table #2: Playing Around in Paint

04-05-2018 02:37 PM by Ron Aylor | 21 comments »

Playing Around in Paint –  After a few hours playing around in Paint, This is what I have so far.           Nothing too fancy. I’m thinking maybe 20” W x 20” D x 22” H (or a bit higher) , with a 6” high drawer. I’ll use cherry and ash as shown. I’m torn between cherry bread boards on the lower tier or an ash border akin to the top … will just have to wait and see. I may also taper the legs a bit to the inside. Well … time to start roughing out some lumber.  Thank...

Read this entry »


View OregonBurls's profile

The Burl Hunter (I need 5 people to help me)

05-04-2010 03:56 PM by OregonBurls | 21 comments »

Hey everyone,I am in need of some help! I am writing a book called “The Burl Hunter”. I am looking for interested people who are willing to read as I write to help me out. I am not a great writer but I love to teach. What I would like to do is get about 5 people to read and critique the book. Even edit my grammar. I would like 2 people who know about burls just to keep me in check and 3 to just read to learn and see how it flows. I need your input. It is a book that will g...

Read this entry »


View Sheila Landry (scrollgirl)'s profile

My Journey As A Creative Designer - Woodworking and Beyond #1008: Butterflies and Posies

04-12-2013 11:45 AM by Sheila Landry (scrollgirl) | 21 comments »

Today I have more pictures than I will post. Little by little everything is coming together and I keep going from one project to the next to the next as things are drying. But things are beginning to come together now and I am seeing the finish line on most of the new things that I am creating. I don’t want to overwhelm everyone, so I will only post pictures of two projects today. The first project that I will show today will be the “Butterflies are Free” candle tray. ...

Read this entry »


View kiara583's profile

Large variety of exotic hardwoods and wood working tools. Free for my fellow LJocks

12-27-2017 05:46 AM by kiara583 | 20 comments »

Helped a friend move from large house with fully equipped woodworking shop to a smaller home. The overwhelming task of packing a 3500 sq ft house plus shop was difficult. Ran out of storage room so everything else was to be thrown out. Thought it would be a shame to throw it away so I spent a week hoping someone would appreciate this treasure. Will post more pictures. Turning tools, large dust collector, drill press, saws etcs. Could sell but would rather share. I only have time invested ...

Read this entry »


« prev 1 2 3 4 5 ... 74 next »
731 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com