LumberJocks

Woodworking blog entries tagged with 'adjusting'

  • Advertise with us
View Div's profile

Building a wooden shoulder plane #6: Tune me finely...but how do I adjust the iron?

05-30-2011 08:50 PM by Div | 27 comments »

Body done, wedge done, plane iron done. If you are anything like me, eagerness to see some shavings has replaced all other desires at this stage! With a bit of luck, paper thin shavings will be curling out of the mouth. Isn’t it great! If not, don’t despair…. LET’S FINE TUNE: 1. True the plane sole. This is done with the blade in place but well away from the mouth and the wedge set up tightly as it would be in use. Why? With the wedge set, our plane is in “tension”. The wood actuall...

Read this entry »


View Dave Rutan's profile

Band Saw Out of Whack

11-04-2015 08:30 PM by Dave Rutan | 2 comments »

Today my band saw decided it wanted some attention. I admit have been just changing blades and running lately. Today it held a small rebellion. First thing I noticed was a sort of knocking sound as it ran, so I turned off the saw, unplugged it and investigated. The 1/8 inch blade I put on yesterday was not riding on the tire on the lower wheel. So I did like we used to do on the small offset presses, I started taking things apart until solved the problem. In this case it was the additi...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com