LumberJocks

Woodworking blog entries tagged with '21st century workbench'

  • Advertise with us
View Loogie's profile

Building a new workbench #3: Mortise & Tenon's are rought cut

02-06-2009 09:55 PM by Loogie | 5 comments »

I got to spend a few hours in the shop yesterday and I got the top planed although I discovered that one half of the top has developed a little twist. I’ll wait until it’s attached to the base and in position before I worry about hand planing it flat. I got the mortises chopped out and the tenons rough cut. Here’s where I sit now:

Read this entry »


View Loogie's profile

Building a new workbench #1: The top is glued up and the components are rough cut

01-29-2009 10:28 PM by Loogie | 9 comments »

I’m in the process of building a new workbench based on Bob Lang's bench as detailed in the October 2008 issue of Popular Woodworking. I’ve read Christopher Schwarz book “Workbenches: From Design And Theory To Construction And Use” as well as several others. It always seemed like I wanted a combination of the features I found in most other benches. Bob Langs design was the first I’d seen that incorporated everything I wanted in a bench, so here goes! I bou...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com