LumberJocks

Woodworking blog entries tagged with '113'

  • Advertise with us
View inghamworkshop's profile

Craftsman Saw Rebuild #2: 113.29990 Cleaning Face Plate

08-31-2016 02:07 AM by inghamworkshop | 2 comments »

I’m looking for som help and guidance here. I decided to try and tackle the cleaning of the silver plate on the front of the saw, which I believe is aluminum, and I’m hoping someone more knowledgeable than me can help. Here’s what I started with: My initial thought was to use water, mild soap and a nylon bristle brush. That did clean a good portion of the large easy to get stuff, but it’s left me with this. I don’t want to do something that I can&#...

Read this entry »


View Rapola's profile

Unisaw Restoration #3: Is 4 tables saws too many?

05-28-2016 03:23 PM by Rapola | 0 comments »

I made some decent progress on the unisaw. With the exception of the yoke/motor bracket assembly, all of the base components are disassembled and I have started stripping the old paint off the cabinet. Hopefully I’ll finish out this long weekend with most of the parts cleaned and primed for final paint. There is a tapered pin holding the yoke/motor bracket together that has thus far thwarted all reasonable attempts with PB blaster and heat. In reading various forums, it seems the ...

Read this entry »


View wmixon's profile

Restoring my Great Grandfather's Table Saw ca. 1950s

06-23-2014 02:28 AM by wmixon | 7 comments »

Hi everyone, I have been a member on lumberjocks for only a few weeks…but have been a reader for a while. I have recently had the opportunity to rebuild my Great Grandfather’s 1950s era Craftsman 113.xx series table saw. What a journey of historical context and family memories this project was for me! The saw was given to me by my father when I expressed interest in setting up a work shop (I’m 28). While in working condition, it had much to be done and some improv...

Read this entry »


View rhybeka's profile

Craftsman 113 table saw upgrades.... #1: Not a true blog...

05-03-2014 01:57 AM by rhybeka | 13 comments »

I’m feeling a bit overwhelmed looking at all of the possible/plausible/necessary upgrades that I need/want to do to my table saw (and other tools but this one takes precedence). So I thought well… I should probably put them in some kind of order – not necessarily in any order – maybe somewhat necessity? As a newb, I just want to make sure my equipment is running as well and as safely as it possibly can. It’s already in great condition for it’s age and I&#...

Read this entry »


View grfrazee's profile

Huge Estate Sale - 300+ Planes!

01-22-2013 03:31 AM by grfrazee | 2 comments »

This past weekend there was an estate sale in Ottawa, IL. The owner of the estate apparently was a huge tool collector, because there were more planes on sale there than I’ve ever seen in my life. For example, the owner had five No. 113s, at least five #12s, more block and bench planes than I could keep track of, and the ever elusive and ever-so-tiny Stanley #1. Since I’ve been looking for a few things, I figured I might as well make the 1:15 drive from Downers Grove and ...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com