LumberJocks

Ultimate China Cabinet

  • Advertise with us
Blog series by bkseitz updated 11-24-2014 06:47 PM 2 parts 3440 reads 3 comments total

Part 1: The Start

10-27-2014 02:08 PM by bkseitz | 1 comment »

Beginning of this year my wife asked if I would build her a cabinet for her china and dish collection. I think she was channeling Martha Stewart as she has several sets of 16 place settings (i.e., needed to build a super-sized china cabinet). The original objective was to have flush mounted doors with push open doors. Below is the carcass building sequence. The project uses 3/4 birch plywood and 1×4 boards with adjustable feet for the base. I used my assembly table to cut and as...

Read this entry »


Part 2: More of the build for the Ultimate China Cabinet

11-24-2014 06:47 PM by bkseitz | 2 comments »

More of the build for the Ultimate China Cabinet [prior photos]. I made heavy use of my Kreg Jig for this project along with a Rockler Shelf Jig. The carcass is made from birch plywood and the base is made of select pine purchased from Home Depot. Base uses t-nut levelers and provides a flat level surface to mount the carcasses. —wish I had purchased the Kreg HD jig prior as it would have been more applicable for the base. Most of the plywood breakdown was done on my assembly t...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com