baniels's Blog

  • Advertise with us
This blog is written by baniels | 2 entries so far

Latest Entry

Router Table #2: Epic Failure

11-15-2009 10:45 PM by baniels | 10 comments »

Got my Microdot Friday. Yay! I had found a good wood filler a few days ago and had filled in and sanded all of the holes. I covered both surfaces with ample adhesive. Waited until they were plenty dry. Just as before, I used dowels to keep the pieces apart as I wined them up. Removed the dowels one by one and pressed on the Formica. I did a preliminary rolling with the J-Roller then flush trimmed the edges of the laminate. Everything was going fine. I spent 10 minutes furiously rolling the laminate with all of my might. And then I noticed a bubble. A large bubble. An area approximately 20” square was not sticking. It wasn’t a high bubble, maybe a 16th or so....

Read this entry »

Older Entries

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics