LumberJocks

A Resaw Adventure

  • Advertise with us
Blog series by bandit571 updated 09-14-2021 11:53 PM 2 parts 1506 reads 4 comments total

Part 1: A back story

09-13-2021 12:45 AM by bandit571 | 0 comments »

Getting bored, just sitting around, resting up a messed up knee….one experiment today, was to try the steps down to the Dungeon Wood Shop…and see how I manage….just me, not carrying anything in my hands…camera went along, sitting in my pants pocket….at least until I arrived in the shop…..had to brush a few cob webs away….spiders were trying a take-over? Moved a few things off of the tablesaw….there is a 1×6 plank I want to try to resaw&#...

Read this entry »


Part 2: Rotate

09-14-2021 11:53 PM by bandit571 | 4 comments »

To complete the cut…left the plywood spacer in place….what was the top is now the bottom. Start here….the saw is about..100+ years old….Disston No. D8…where the “8” is inside of the “D”...5-1/2 ppi, 28” long…big saw… Once it gets going, a spray of sawdust shoots out, all over the place. At about the 3 minute mark.. A nice steady…not too fast, not too slow ….had to stop for a bit, switched the hands a...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com