LumberJocks

Walnut Night stand

  • Advertise with us
Blog series by bandit571 updated 09-13-2016 06:55 PM 6 parts 5869 reads 10 comments total

Part 1: Started up

09-08-2016 04:55 AM by bandit571 | 1 comment »

Well, the Cherry box is awaiting a delivery this coming Sunday. There is a little bit of leftover Cherry sitting around. Time to cut the other slab down to size? This used to be 7’.....cut the top slab at about 38” long. The other two add up to about 4’...Decided to cut the long slab down a bit.. Took a lOT of candle wax to cut through 2-1/4” thick slab. What I though was another slab of Cherry, turned out to be… Walnut. This slab was 9/4 thic...

Read this entry »


Part 2: Had to find my lathe

09-08-2016 11:32 PM by bandit571 | 2 comments »

Before I could turn this post/column….Moved a couple stands around, moved a sheet of plywood elsewhere. Found a bench of some sort, removed all the junk ( well, almost all) that was piled up…...floor now has a footpath.. And ..lookee what I find.. I also found some tools for it.. So, got that chore out of the way. I got the blank out of all them clamps. Bandsaw to trim the neds a bit It is in the vise, until I could find out where the center is. Once found on e...

Read this entry »


Part 3: Back to wood working

09-09-2016 11:46 PM by bandit571 | 2 comments »

Well..I did find Mr. Gumption today…...and he put me to work, so much so, I was dripping on everything in the shop. Gave the lathe a rest for a while. Decided to flatten the top, and work on it until a circle was done….almost. I have a Stanley No.5c, with a Schwarz style cambered iron. Scrubbed all the high spots down to match the low ones, was a bit rough. I went at an angle to the grain, mostly. Then went with a slightly bigger plane.. Used this #5-1/2 as a ...

Read this entry »


Part 4: Leg work, van work, leg work

09-11-2016 01:43 AM by bandit571 | 0 comments »

Just one of them days…..while waiting on the help to rouse himself out of bed…..went to the shop for a little while. Set the beltsander into the vise. The three leg blanks were wavy, and a couple were a bit fat. Turn the sander on, and hit the lock button. Held each part on the moving belt until the saw marks were gone, sides were flat. Found out that the inside curve was a decent enough of a match.. That it would fit the front roller. Got rid of some other saw m...

Read this entry »


Part 5: NEVER work on Mondays

09-13-2016 05:04 AM by bandit571 | 1 comment »

Yet, somehow I keep forgeting that one rule…. Came away from the Doctor’s visit, needing X-rays and Dr. Feelgood for a sore knee, I now have a Handicap thing to hang in the window of the van,,, I thought that somewhere in the shop, there were a few wood screws. Slotted heads, hopefully Brass ones….nope. Went to Lowes, to by a few screws…..#8×3/4” round head, slotted Brass screws…...that were priced like they were gold plated. 3 little ...

Read this entry »


Part 6: Tuesday was a bit better

09-13-2016 06:55 PM by bandit571 | 4 comments »

Let’s see, cleaned the bench off a bit Except for a couple tools I thought I might need.. And brought this thing out of hiding.. Yep…that pine scrap did wind up glued in place. Wide chisel to pop it off. Got to looking at the legs….decided in the interests of it NOT falling over, a fourth legs was needed. First two legs were NOT 120* apart… Did NOT feel like digging another dovetail joint into the base with three already glued up. Used one leg as a pat...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com