Into a table..Drawer came out of the clamps…was cleaned up, and a knob screwed and glued in place,,test fit into the opening…
Top was seen by this…
To mill a bevel all the way around, on the underside…
Then the base was attached to the top…
Any left over pencil marks removed,,,BEFORE a coat of Amber Shellac could get brushed…
Drawer was done separately…
Once everything was dry..
Will rub this down with 0000 steel wool, later…and do a second coat….seems I even missed a few spots…
Stay tuned….
-- A Planer? I'M the planer, this is what I use
1 comment so far
lightcs1776
home | projects | blog
4280 posts in 3109 days
#1 posted 05-12-2022 12:47 PM
Very nice work, Sir.
-- Chris ** If there must be trouble, let it be in my day, that my child may have peace. — Tom Paine **
Have your say...