LumberJocks

June 2021, leftover scraps of Ash, Box Project, maybe #2: Bring on the planes

  • Advertise with us
Blog entry by bandit571 posted 06-08-2021 10:10 PM 335 reads 0 times favorited 0 comments Add to Favorites Watch
« Part 1: Resaw work to start Part 2 of June 2021, leftover scraps of Ash, Box Project, maybe series Part 3: Started on the corners »

Time to flatten the boards a bit..

Clamped the narrower of the longer boards into the vise…run a jack plane across to knock down the high spots..

A “Before & After”....and then after the other half was done…

Not too bad?

Set #2?!
https://s3.amazonaws.com/vs-lumberjocks.com/quel2cp.jpg!
Jointed the edges a bit..

There was a beltsander in use, as well…
Set #3 took a bit more work…

Decided to use the tablesaw, and trim this up as a 4-square,,,before I went too much farther..

Then each went in to the vise for a bit…

Finally, was able to line both up..

I still think this is better than driving down to Lowes, and buying their over-priced “Project Boards” besides, they don’t carry Ash.

Next up? Transform 4 of these into a box…that’s next time…

Stay tuned…

-- A Planer? I'M the planer, this is what I use



0 comments so far

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com