LumberJocks

A box for chisels #6: Tuesday's rest day?

  • Advertise with us
Blog entry by bandit571 posted 10-15-2020 12:30 AM 345 reads 0 times favorited 0 comments Add to Favorites Watch
« Part 5: Flipping a lid Part 6 of A box for chisels series Part 7: Rounding the corners, and a PIP »

Not exactly…..Finally, was just going to look at the hardware box….to see what hinges, latches, and handles were left…..Not much….some more fiddling with how the lid and box fit together….had the box assembled, and clamped in the vise…was using the #4 to smooth out a couple bumps on the back of the box….

Then, this happened..

had to cut the head off of a small, skinny nail, and chuck it into my cordless drill…pilot holes…dug out the fancy screwdriver to drive those very tiny screws….Ok…

turned the box over in the vise….more smooth plane work…then it happened again..

T’would seem that this is the latch that was chosen…..started to work on the ends…

Handles! These were supposed to get nailed on? Ah..no..not this time…I have more than enough screws on hand…

Got to thinking about HOW to stack 7 chisels in the box….decided to use up a bit of skinny scraps..

Smear the backs of the parts with glue…there is a cross piece under the chisels bolsters….and..seems I gained a chisel?
And THAT was it for Tuesday….shoulders were still sore…and this didn’t help all that much…Wednesday will be a better day, I hope..

Stay tuned…

-- A Planer? I'M the planer, this is what I use



0 comments so far

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com