Next Kitchen Project #2: Wood supplies, and one glue up

  • Advertise with us
Blog entry by bandit571 posted 10-18-2018 11:34 PM 717 reads 0 times favorited 1 comment Add to Favorites Watch
« Part 1: Start up Part 2 of Next Kitchen Project series Part 3: Side #2, and a top »

Was looking through the stash of Oak i brought home….this might be interesting…



Not all was this fancy-schmanzy, though..

Good thing I’ll need some narrow parts…hauled a few to the shop..

These were for side panel #2..already had parts for #1 cut to length..

Already stashing cut-offs, for smaller parts..

Well, today..after tests at the local Hospital…and a nap….did a cardio workout..

This is about an hour’s worth….they pile up, when they look like this..

Jointed the edges for side #1 parts…

Used all of these planes….some places were a bit rough, and knotty. Finally got all the edges to go together, without gaposis setting in….Add the beads of glue, the clamps, and a couple cauls…

Panel is now glued up. Used the tablesaw to cut parts for panel #2…..had to dig up the shop apron…not allowed to get these brand new jeans messy from the shop…

Wound up firing the splitter/guard on the saw….all it did was bind up, and pull stock away from the rip fence…

Have two 1×6 x 3’, and that 1×2-1/2” x 3’ boards. Need to joint the edges.tomorrow. letting glue up #1 sit over night. Cut off pile is growing..

face frame parts? Need a panel for the base’s top? Door Parts? Will have to see how things go….
Stay tuned…

-- A Planer? I'M the planer, this is what I use

1 comment so far

View lew's profile


13424 posts in 4994 days

#1 posted 10-19-2018 02:26 PM

Shop apron…. Hope it’s not like my turners smock that I always forget to put on until I’m covered in chips and shavings!

-- Lew- Time traveler. Purveyor of the Universe's finest custom rolling pins.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics