LumberJocks

Study Desk and Table For Lovies Christmass present

  • Advertise with us
Blog series by anthm27 updated 12-08-2019 08:16 AM 2 parts 2332 reads 57 comments total

Part 1: Part 1

12-07-2019 08:25 AM by anthm27 | 29 comments »

My original plan wasn’t to Blog this project, I was going to wait until it was finished. After todays assembly however I am so excited that my leg design concept actually worked quite well.My Original design, just sort of came together. Assembled today down on the 1st floor, had to carry the parts down , we would never have gotten it down the stairs fully assembled. The legs are connected together by a 3×1 rail at the back, doweled , glued and clamped. A sigh of relief when ...

Read this entry »


Part 2: Part 2 The drawers

12-08-2019 08:16 AM by anthm27 | 28 comments »

Made the drawers today from 1/2 inch ply. Track saw or a table saw would have been nice, Just had to do it the old way with a straight edge and circular saw.Glued and nailed the drawer carcass together , rounded them over and got them installed inside the frame with nice soft closing drawer slides. Drawers nice and big, two foot long and over a foot wide. 6 inches deep Pics show my days work, from start to finish. Drawer fronts to be laminated up tomorrow, out of 3×1 ...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com