This blog is written by andyboy | 152 entries so far |
-
Corner shelf joints exercise.
Here is a look at what my students will be learning to make later this year. https://youtu.be/...
-
Kids country chair
https://youtu.be/yF5INHMt1dU
-
part 2 corner cabinet #3: Making the doors
Making and hanging the doors for this nice little corner cabinet. Had fun making it :) https:/...
-
Desk with burn finish.
If you scratch around you will find part 1 and 2. This is part 3. Just wanted to show you’s...
-
part 2 corner cabinet #2: Corner cabinet
https://youtu.be/F_DVxQajLrA Project 3 for my 2016 students. A corner cabinet.
-
Cheap pallet bed.
Nothing fine here guys and girls. This is rough and ready. But practical.https://youtu.be/cV5WJyu...
-
Desk prototype part 2
https://youtu.be/Daol4a-Y6rI Assembing the carcase.
-
Desk. A student project (prototype)
https://youtu.be/5aTLkX6zABg 900 wide x 750mm high x 450 deep.
-
cheval mirror
a project for my students this year.https://youtu.be/AyCTedrWuno
-
Milling large Totara log with Alaskan attachment.
https://www.youtube.com/watch?v=S0mA4RMA7-c Hi guys. Check out what I have been up to lately. ...
-
Happy Christmas
Hope you all have a great time with mates and family. Take care in your workshops and keep finger...
-
Timber Milling
This is what I have been up to lately. Bought a cd2100 Husky and a milling attach...
-
Student progress.
https://www.facebook.com/photo.php?fbid=10156071362205454&set=pcb.10156071366315454&type=...
-
Job in NZ
http://www.trademe.co.nz/jobs/education/tertiary/listing-929790412.htm
-
900 x 500mm coffee table.
http://youtu.be/6zz0alDuC5k Go on. You might even enjoy it. I love being in my happy place.
-
Rowans mallet
http://youtu.be/I5IzzWCWMvQ Here is a cool weighted mallet that my mate made and videoed
-
Bedside cabinet student project part 3 #4: Bed side cabinet part 3
http://youtu.be/_fvjrQYhadg Making the doors and hanging them.
-
Bedside cabinet student project part 3 #3: Bed side cabinet part 2 (student project)
Preparing the bedside cabinet carcass for the doors.http://youtu.be/HV-9h64jBpc
-
4 drawer chest part 2
http://youtu.be/29p5fp6jVyM?list=UUBJ_un-58R1Au7CSKwVIv4w Here is part to. making the drawers....
-
Bedside cabinet student project part 3 #2: bed side cabinet part 1
http://youtu.be/S4qRnE2Whd8 Bed side cabinet with a door.
-
4 drawer chest tutorial.....ish. Not every detail sorry.
http://youtu.be/coMvuls8aaY?list=UUBJ_un-58R1Au7CSKwVIv4w
-
skill saw unboxed.
https://www.youtube.com/watch?v=ksBIjBR-g2c&list=UUBJ_un-58R1Au7CSKwVIv4w
-
Ozito skill saw un boxed.
http://youtu.be/ksBIjBR-g2c My 0ver 30 yr old skilly died. So I bought a new cheap one.
-
paul frankl dressing table 6 #6: Paul Frankl Dressing table. 6
http://youtu.be/brFzINF9VWI Will have some nice pics soon. The mirror next. If anyone knows of...
-
Pallet swing
http://youtu.be/AKRF9awE_h4 Made this swing from one pallet.
-
paul frankl dressing table 6 #5: paul Frankl Dressing table.
http://youtu.be/hHsHyx9R7Js Not far to go now. Starting to look the part now!
-
paul frankl dressing table 6 #4: Dressing table progress
https://www.youtube.com/watch?v=Dyn-kjrd1mk&feature=youtu.be Almost finished. Loving the c...
-
student dovetails #4: Student progress dovetailing.
http://youtu.be/nE9ayin-vXQ Really proud of the determination my students have shown learning ...
-
student dovetails #3: Dovetailing Frankl drawers
https://www.youtube.com/watch?v=TUkaWeZGuSc&list=UUBJ_un-58R1Au7CSKwVIv4w
-
student dovetails #2: Paul Frankl Dressing table.
Wow!! This is proving to test my patience and teaching me a few skills along the way. Curves are ...
-
student dovetails #1: Paul Frankl Dressing table.
Here is what I am working on at present. Proving to be quite a challenge for me….which is g...
-
BBQ Trolley
http://youtu.be/qV8sLdVHb0c I enjoy cooking outside with my wok. The wok I use is made from a ...
-
Trade skills students making a stool.
https://www.youtube.com/watch?v=4MX84hVc-gY&feature=em-upload_owner#action=share
-
CNC at work
http://youtu.be/mf1Hata9t7k
-
Milling some pine for school.
http://youtu.be/uISceupRskI
-
retro coffee table part 2 #1: Retro coffee table. Part 2
http://www.youtube.com/watch?v=5hjpeF30SDQ&feature=youtu.be Here is part 2 LJ’s. Wil...
-
Retro coffee table part 1
Sorry about delay. Here is a bit of entertainment for you all.http://www.youtube.com/watch?v=YfBs...
-
Retro coffee table. Part 1
Hope you enjoy this. It has been a blast till now. Part 2 won’t be far off.
-
Retro bedside cabinet
http://www.youtube.com/watch?v=w9SEQDJoM94&feature=c4-overview&list=UUBJ_un-58R1Au7CSKwVI...
-
josef albers bookshelf
http://www.youtube.com/watch?v=gS5whcSTSi4&feature=youtu.be This is the first project for ...
-
Up-cycle adventure.
http://www.youtube.com/watch?v=PhFuDSq_oyg Paint onto wood is fun! If your going to give this ...
-
Dressing table restoration
http://www.youtube.com/embed/DwTu3HE_JHk?list=UUBJ_un-58R1Au7CSKwVIv4w
-
Sausage stuffer :)
http://www.youtube.com/embed/x5XgBNaz-zg?list=UUBJ_un-58R1Au7CSKwVIv4w
-
Nakashima bench coffee table.
http://www.youtube.com/embed/a9MJvx3ppPs?list=UUBJ_un-58R1Au7CSKwVIv4w
-
Up cycled desk for Harriet. Before and after.
Bought this also. Spent a few days fixing runners and sanding off old paint.
-
Chest restoration up cycle
http://www.youtube.com/watch?v=SIT5rjMMHb8&feature=youtu.be Here is what I hav...
-
Chair Progress
-
student progress
http://www.youtube.com/watch?v=K-xsYUVp104&feature=em-upload_owner#action=share
-
student progress
-
Student progress Nakashima Bedside cabinet.
-
Hubel Hall table(Slim Shadey) part 5 #5: Huble hall table part 5 ("slim shady")
-
Hubel Hall table(Slim Shadey) part 5 #4: "Slim Shady" taking shape. Hall table.
-
Hubel Hall table(Slim Shadey) part 5 #3: Huble hall table part 3 ("slim shady")
-
Hubel Hall table(Slim Shadey) part 5 #2: Hall table 2013 part 2
I encourage you guys and girls out there to get stuck into those jobs you have always wanted t...
-
Hubel Hall table(Slim Shadey) part 5 #1: Hall table 2013 part 1
Modeled off Brian Hubble’s “Slim”. Can’t wait to see it standing up an...
-
Making a router/spindle moulder leg jig
-
Furniture students at work
-
Log recovery
The raw materials!
-
Dovetailing with Kauri
This is how I dovetailed a replacement engine box for a clinker dingy.
-
Steaming up some pine
Here my colleague Rowan demonstrates how he bends components for a light stand.
-
Nakashima Night Stand part 3 #3: Nakashima Night Stand. part 3
The final part. Hanging the doors. This has been a cool experience!
-
Nakashima Night Stand part 3 #2: Nakashima Night Stand. part 2
Assembling carcass and making base/legs.
-
Bookshelf progress. Students.
Some amazing work being completed by my students.
-
Nakashima Sketch up
Here is the project I am in the process of making for my students.I have been up...
-
Nakashima Night Stand part 3 #1: Nakashima Night Stand. part 1
It was nice using some harder timber for a change. Tasmanian Blackwood that I found on our river ...
-
washington university furniture studio
Just borrowed from our library a cool book, Furniture Studio by Jefffry Karl Ochsner. Hope ...
-
paul frankl dressing table 6 #3: Bedside cabinet part 3
Making and fitting drawers. See it finished.
-
pizza boards
What my students made in the first week with me.
-
paul frankl dressing table 6 #2: Bedside cabinet part 2
In this video I show the inner workings for the drawers. Hope you get a few tips and most of all,...
-
Bedside cabinet student project part 3 #1: Making a Bedside cabinet part 1
-
bookshelf
-
Assembling stairs
Thought this might be interesting for you LumberJocks,enjoy…
-
Hanging back door.
I needed a back door so I made one. This video shows how I hung it in the opening.
-
Restoration. chest of drawers part 4 #4: Chest restoration. The final chapter.
-
students progress and finished work
-
part 4 chest restoration #1: Restoring chest part 4
Building up top drawers. My shed has warped the sides of the cabinet with the heat. Hopefully ...
-
Restoration. chest of drawers part 4 #3: Restoring chest part 3
-
part 1 restoration chest of drawers
-
High school work. Inter-school competition I helped judge.
-
Restoration. chest of drawers part 4 #2: restoration of chest of drawers part 2
-
Restoration. chest of drawers part 4 #1: Chest restoration
Restoring a chest of drawers my wife’s grandmother owned.
-
More progress from 2012 furniture students.
These guys have done soooooo well this year. Here they are finishing off their final project.
-
Student progress
Very short progress up date. Hope to bring you a gallery of finished work. These guys have been f...
-
Fine wood working conference
Is any body going to the inaugural Fine woodworking conference in New York? My work mate and I ar...
-
Time lapse
See if this works guys. Had a bit of trouble before.This is a student of mine Matt, putting hi...
-
Steam bending a coat hanger
At work making coat hangers to demonstrate steam bending
-
bunks
Just finished these bunks. King singles. Nice size.
-
Steam bending
A small snippet of a mate bending some Pine for a lighting project.
-
sideboard part 5
Here is the final part folks. Fitting the doors and drawers.
-
sideboard part 4
Making the doors for the sideboard.
-
sideboard part 3
Moving on…..here is a bit more. Drawer runner install and divisions. Attaching the top and ...
-
sideboard part 2
Getting the job up to most of the carcase being assembled.
-
part 2 corner cabinet #1: sideboard construction. (screw together)
A quick journey through how I constructed my side board. I found a pile of unedited clips that I ...
-
Student Lamp table progress
A few random shots of our new work shop and students work.
-
George chair progress
I finally got around to getting my George Nakashima inspired canoid chair to finishing stage. Hop...
-
Student lamp table progress.....
Will keep you posted on progress. Some nice timbers we have been playing with. Saligna, Elm, O...
-
Gents saw handle remodel
Here is a quick look at a one of my student’s fitting his remodeled handle to his dovetail ...
-
Kubb box. Student progress.
These are our future LJs contributors I hope. A few have joined in recent times and have some gre...
-
Hand plane tune
This will get you started if you have had trouble getting your hand plane to work nicely.
-
Workbench
I knocked this up today and half of yesterday. I wanted a good surface for chopping dovetails etc...
-
George chair 3
Here is a wee bit more of today’s efforts.
-
George chair progress
-
deck chair measurements
Well here is a start for all you people that requested measurements.I hope they are helpful.Andy.
-
Make way for the new workshop
Here is a brief look at the demolition job done on one of our buildings once used as a carpentry ...
-
A snapshot of my working day
Here is my students learning to plane and rip timber. Also using their planes they made.
-
Spammers
I got a “hello dear” email on the back of lumberjocks. I have a wife and they wanted ...
-
Here is my furniture class learning hardening and tempering.
Hardening and tempering a plane blade.
-
George chair work in progress
Here is a wee taste of some progress on a George Nakashima look a like chair.
-
Kenny and glue
http://youtu.be/Qcb-4-NlT28 I had a theory class today on adhesives and opened with another Ke...
-
Kenny makes a cabinet
http://youtu.be/_p_mdGtY26Y If you are short of humour, this might pick you up.My kind of funn...
-
Reshaping an in-shave
This tool had nasty flat spot. My mate altered it for me. Brilliant job Peter!
-
Finishing the 2011 bookshelf
Here is how I finished the bookshelf in our now demolished spray booth.Hope you get a few pointer...
-
Making a bookshelf 2011
Just tidying up my videos. Here is a book shelf I made last year in our old shop. We get to move ...
-
Setting up my new Mortice machine
A few tips for lifting heavy stuff and finding where nuts and bolts go in the setting up of my mo...
-
Lamp table part 2.
Making and hanging the door using “chunky” butt hinges. Oh and the end credits are at...
-
Lamp Table part 1
Here is a little lamp table I have made to demonstrate hanging a door using butt hinges. In this ...
-
Mad Mick
Found this, should give you a laugh. Did you ever get spoken to like this when you were young?
-
Dressing table part 2
Wow what a ride. A lot of thinking and detail but we go there in the end. Here is the process in...
-
Progress of Dresser (sorry no music)
Just had to keep you tube happy and remove the music. Still getting my head around a few things. ...
-
Dressing table progress
Processes involved making the base of a dressing table. Tons of little hints and tips.
-
Geoff wins an award. Grad student. Had to share this with you guys
http://designfolio.co.nz//_blog/Design_Folio_NZ/post/Geoffrey_Young_Design_Folio_Incubator_Award/
-
Miniature scotch chest
Here is the promised video making the model sized chest.
-
v-shelf bookcase
Here is the v- shaped bookcase video as promised from the Bookcases book by Niall Barret. I made ...
-
Book shelf making Grump!
Today was a testing experience with 26 degrees c in my little garage I managed to break 2 -6mm ro...
-
Making a mallet
Another small project that can easily be made in the home shed.Good machining and hand skills. A ...
-
Sharpening your pencil.
One of those things we experienced one take for granted. Still a bit rough and ready, but this is...
-
Plane from wood scraps and an old hacksaw blade
This is a satisfying little project that many of you can make in your sheds/shops/garages. You ma...
-
wedged marking gauge
Her are some processes I used to make a marking gauge that locks with a wedge. The timber is NZ B...
-
Making a Kubb set
This is a fairly basic video on some machining processes and hand skills. Should you choose to ma...
-
making desk part 4
-
desk part 3 no music so you can all see it
-
bedside cabinet part 3
Part 3 covers making drawers using a Logan dovetailing machine.
-
part 2 bedside cabinet
Part 2 of a series of 4 videos making a bed side cabinet
-
paul frankl dressing table 6 #1: http://youtu.be/ZUQ52DIVwlE
Here is a project I made with my students. Made from shipping pallets. Hope you enjoy it!
-
Raised panel doors (Under flush)
Just pushing a method I have practiced and throwing it out there to see what your feed back is.Th...
-
The making of "Grace" halltable
All pine and white washed.
-
Desk, part 4, 2011
Hanging doors using butt hinges Making doors with mortice and tenons
-
Desk part 3
http://youtu.be/yMUct5D5Ktg
-
http://www.youtube.com/watch?v=hDXgG1_MkbE&feature=related
Here is part 2. A lot of detail here.
-
http://www.youtube.com/watch?v=t7y7HrFHpnI
-
http://www.youtube.com/watch?v=t7y7HrFHpnI
Be patient with me and a few more parts should follow
-
Part 1 of making a desk
-
http://www.youtube.com/watch?v=AVT6gWUKSGw
heres the video to the last blog.Blowed if I can easily upload videos to lumberjocks.
-
Solid Legs..."Yeah Right"
Check out this leg. I just got asked to turn this leg into small blocks for pencil holders for my...
-
Pot scrubbing using your batterie drill
http://youtu.be/J-fjWk_p3t0 I might have this clip removed for not relating to wood. Any wa...
-
Changing surface planer/buzzer knives
http://www.youtube.com/watch?v=d_g6lHi9vSc This is how i change the knives on the machine I op...
-
Replacing a bandsaw blade
Here is how we replace the blade on our band saw. A fewhttp://www.youtube.com/watch?feature=playe...
-
sharpening cheap chisel
This was an interesting exercise. I quietly hoped I was going to transform one of these cheap chi...
-
A quick look at my approach to dovetailing
http://www.youtube.com/watch?v=g0pXMOc31Nc&feature=player_embedded
-
oil stone box
http://www.youtube.com/user/Aandyaitch123#p/a/u/0/0zjMc1b07TQ Hope you enjoy this12 hours work...
-
http://www.youtube.com/user/Aandyaitch123
Here is a video I have made for you all. http://www.youtube.com/user/Aandyaitch123 I look forward...
-
What we are up to in New Zealand
Hi all fellow LJs. We invite you to check out our students work on Facebook. {UCOL Furniture Des...