LumberJocks

Woodyvolt's Forum Topics

  • Advertise with us
View Woodyvolt's:homeworkshopprojects (2)blog (1)reviews (0)forum topics (12)buddies (1)favorites (0)activity logWatch
09-11-2021 03:48 PM

Identifying Wood - 6 replies

Need help ID ing this wood. Put mineral oil on a portion. End grain in previous post.

09-06-2021 01:33 AM

Wood ID - 13 replies

Need help identifying this wood. Wiped with mineral spirits, end grain in next post.

07-19-2021 08:20 PM

Identifying Wood - 3 replies

I’m getting ready for my next project. This piece of wood was not identified when I bought it. It looks like walnut to me but I don’t have the experience to make a solid judgement. Again, I coated half of it with mineral oil to bring out the grain.

07-11-2021 06:19 PM

Identifying Wood - 27 replies

Need assistance ID’ing this wood.

07-06-2021 09:32 PM

Identifying Wood - 1 reply

Next piece of wood to ID. As requested on the last sample, I applied some mineral spirits on a portion of the board to bring out the grain. The end grain will be on the next post.

07-01-2021 10:38 PM

Identifying Wood - 19 replies

This is one side of a piece of the many types of exotic wood I recently was given. Trying to ID. Will send the opposite side as well as end grain in the next posts.

06-16-2021 02:43 PM

Identifying Wood - 23 replies

I recently obtained some lumber pieces that are considered exotic by the person that I got from. Some were labeled, some were not labeled. Will post pictures occasionally and hope viewers can help identify the pieces.

06-06-2021 10:47 PM

Identifying Wood Species - 11 replies

I recently acquired several pieces of exotic wood pieces. Some were labeled, most were not. I want to identify each type. I could supply pictures of each, about 20, but would be simpler to use an app to do the work. I took pictures of each piece, plus a picture of each end grain. Would appreciate help on selecting an app that helps identifyin...

04-05-2018 12:48 AM

Understanding funtion of jointer table gibs - 4 replies

I have a JJ6CSX Jet jointer. The infeed table is hard to change and I have recently broken and replaced the yoke that lowers and lifts the table. I have cleaned and lubricated all parts that could be causing the problem with no change. The problem is not the table lock as I have checked that. The only conclusion that I have, is that the pro...

02-04-2018 02:47 PM

Type of wood for furniture - 19 replies

My daughter wants me to build some furniture for her. I would normally use a hardwood but she plans to paint the finished product. This makes me lean toward using pine which is less expensive and easier to work with. Any suggestions on which type of wood that I should use? Thanks

12-26-2017 07:47 PM

Lansky sharpening system - 10 replies

The blades on my planer are needing to be sharpened. Our local sharpening service just went out of business so I was considering trying to sharpen the blades myself before having to go out of town for service. I have a Lansky sharpening system plus an off brand “V” type sharpener. Has anyone used these methods to sharpen joiner o...

12-26-2017 02:21 PM

tambour - 2 replies

I have been ask to build a tambour for a roll top desk that had the existing tambour thrown away. I have watched some YouTube videos on this and have a fair understanding of what to do, but have one question. How much gap should there be between the slats and the frame of the desktop? I want it free enough to move but don’t want it to...


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com