How I made #8: Makeup mirror with LED light

  • Advertise with us
Blog entry by WoodenWorldDenic posted 09-04-2018 12:18 PM 1578 reads 1 time favorited 2 comments Add to Favorites Watch
« Part 7: Wooden purse Part 8 of How I made series Part 9: Wine shelf "10 Bottles" »

On video Making a Makeup mirror with LED light you can see the entire process.
The most important thing in solving this task was to find a plastic tray with a diameter of 33 cm, with sloping sides, which perfectly disperses the light. In addition, the tray has the necessary firmness to prevent twisting, and all for less than $ 2 :-)

a piece of chipboard as a base for the mirror

Two slats and a piece of 8mm plywood connected by 8 mm diameter wooden wedges, is a mirror support.


Sticking the LED stripe in two rows

The power supply is a bit higher so I had to remove the casing

And at the end, I gluing the mirror


2 comments so far

View robscastle's profile


7237 posts in 3008 days

#1 posted 09-05-2018 09:44 PM

Hey! hello again Denic,

Lots of pictures but no materials list, so I need to ask, ... what is the product you used to glue everything together with?

-- Regards Rob

View WoodenWorldDenic's profile


126 posts in 3809 days

#2 posted 09-06-2018 06:44 AM

Hello Rob,
For gluing you can use silicone (like me) or other suitable mounting glue.

Regards WWD


Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics