Redwood Table #2: Staining
After some advice from other wise lumberjocks I decided to flatten the top by sanding it with my belt sander instead of trying to pull it flat with angle iron. It still has a very slight sag in the middle but it’s hardly noticeable and won’t affect the function of the table. I doubt the customer will ever notice unless they pour a glass of water into the middle of the table to see which direction it goes. I sanded it to 220 and then went back and filled a couple small bubbles in with more epoxy. I’ve given up on getting every single one of the bubbles but I did get most of them filled in. Then I sanded it again. Then I put the first coat of conversion varnish o...
