First Router Table

  • Advertise with us
Blog series by Jeff updated 06-21-2009 05:08 AM 2 parts 17981 reads 8 comments total

Part 1: Table top

06-20-2009 04:13 PM by Jeff | 4 comments »

I kept having the need for a router table to use bigger bits, so I decided to make a table. After much review of other projects, I designed what I felt would work best for me. The top is made of two 3/4” mdf sheets cut 22 1/2” x 34 1/2”. They are glued with regular titebond wood glue and screwed with coarse thread 1 1/4” drywall screws. I laid out the areas where the insert and miter track would go so as to keep from putting screws in those areas. At this point I ...

Read this entry »

Part 2: Cabinet

06-21-2009 05:08 AM by Jeff | 4 comments »

Again, after much research and finding what I thought I would need and use, I decided to make the cabinet from poplar and mdf. The joinery is raised panel construction for the sides and back and straight pocket hole joints on the front. I knew I wanted to leave about an inch overhang of the top, so the dimensions are roughly 22” x 34” and 34”high(including the top). The pocket holes were so easy and very strong. The first picture I show using some leftover weather stripin...

Read this entry »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics