Jeff's Blog

  • Advertise with us
This blog is written by Jeff | 2 entries so far

Latest Entry

First Router Table #2: Cabinet

06-21-2009 05:08 AM by Jeff | 4 comments »

Again, after much research and finding what I thought I would need and use, I decided to make the cabinet from poplar and mdf. The joinery is raised panel construction for the sides and back and straight pocket hole joints on the front. I knew I wanted to leave about an inch overhang of the top, so the dimensions are roughly 22” x 34” and 34”high(including the top). The pocket holes were so easy and very strong. The first picture I show using some leftover weather striping for a cushion of the panel sitting in the rails and stiles.From Router TableThis is one of the side panels on the bottom and the back panel during glue up. Only the frame is glued together leaving ...

Read this entry »

Older Entries

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics