LumberJocks

WoodMechanics's Blog

  • Advertise with us
This blog is written by WoodMechanics | 1 entry so far

Latest Entry

Olschner family coffee cup table #1: Olschner Family coffee cup table

03-06-2014 02:08 AM by WoodMechanics | 0 comments »

Heres a step by step process I took to make a Moroccan table frame for a brass tray top! These are pics i found online for inspiration! The fist steps I took was to make a full scale template out of mdfcut this rectangle 32’’ wide by 18’’ tall and layout centerline and horizon centerline with a straightedge and screw to make a big compass swing a arc through the center intersecting point down on both sides to make the top of the legs then with a smaller radius measure down 2’’ from the center and swing the bottom arc so the legs taper as they get closer to the floor. Next is to draw the top arm on one side. the only measurement I used was ...

Read this entry »


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com