Frank Klausz Woodworking Workshop Tour

  • Advertise with us
Blog entry by WoodAndShop posted 08-25-2014 05:25 PM 10806 reads 4 times favorited 7 comments Add to Favorites Watch

In my above video I share a recent visit that I made to the newly finished woodworking workshop of Frank Klausz. Frank is a world-renowned cabinetmaker and teacher who received his training in his father’s pre-electrical workshop in the mountains of Hungary. See the original blog post here.

Before you ask, look at the bottom of this article for a list of all the tools that Frank mentioned in the video.

When I first arrived at Frank Klausz’s home I was warmly greeted by Frank, his wife Edith, and their Hungarian hound. After a quick tour of the exquisite furniture and trim that adorned their quaint country home, we had a very nice conversation about Frank’s upbringing in the remote mountains of Hungary. He was tutored by his father and grandfather in the traditional craft of using hand tools to build furniture, because electricity had not made its way to that part of the Soviet-controlled region of Hungary. As he spoke, I could picture a small candlelit workshop perched on the slopes of a picturesque eastern European mountainside. The Klausz men only used a handful of tools in their shop. “We only used a few hand planes, five or six chisels, and some handsaws” he emphasized.

Frank and his wife Edith then related their story of their courtship before they came to the United States. Edith’s eyes glowed as Frank related his side of the story. He told her that he would marry her after he returned from his military service. He paused. Then a smile came to his face as he recalled her response nearly 50 years earlier “what makes you think that I want to marry you?” I looked over at Edith and a smile stretched across her face.

Well, apparently she waited for him and married him, and after emigrating to the United States they had several children. They eventually left the bustle of New York for the quiet calm of the New Jersey countryside. He opened “Frank’s Cabinet Shop” where he worked for years, until retiring 3 years ago. Because Frank is one of the few unbroken links to traditional hand tool woodworking (other than books) he has become somewhat of a celebrity among woodworkers. He has traveled extensively to teach classes & seminars, and has been featured in many woodworking magazines and popular video recordings, like these classic videos.

Frank cleverly turned this old water tank into his dream workshop. In our off-camera conversation he related how the water tower used to service fountains for the mansions of business tycoons of the late 19th & 20th centuries.

Frank wanted to build a workshop that also doubles as a gathering place. A place to sit and chat with friends on a cold winter night while the wood stove burns away. I was immediately impressed by how clean and organized his workshop was. He seems to take great pride in his space and in his tools, especially his plum-bob collection.

Frank was especially fond of the amazing natural light that his skylight windows spread around his workshop. I have to admit that I felt a bit jealous, coming from a basement workshop.

He gave me a tour of the 3 beautiful European-style workbenches that he built over the years. His autographed dovetailed vices were eye catchers:

He was very adamant that woodworkers should build a solid workbench that will last for generations. He is also of the opinion that tool chests are for traveling, but tool shelves are for a workshop. He loves the convenience of grabbing hand tools from the wall-mounted cabinet that he built. He said that it was the backdrop for most of his woodworking videos:

I was immediately impressed by Frank’s down-to-earth, practical, and modest personality. When I asked him about his favorite hand tools I was a bit surprised by his response. I was expecting him to pull out some rare antique handplanes or a special handsaw passed down from his grandfather.

But Frank pulled out new tools made by quality manufactures. His absolute favorite tool is his Lie-Nielsen No. 4 Smoothing plane. He was so impressed by the improvement upon the old Stanley Bedrock No. 4 design. Although he loves the old tools, Frank isn’t trying to appear as a “purist” or a “tool snob” who only uses rare antique tools. He loves how some new manufactures are improving upon the best designed tools of the past. Frank is a real cabinetmaker who values innovation and features that make the job easier.

He’s something of a tool innovator himself. He is very well known for his creatively-designed “Waterstone Pond” which is used for sharpening chisels and handplane irons. I have to admit that the first Woodworking DVD that I ever watched (I checked it out from the library) was Frank’s “Hand Tools” video. I first saw the this waterstone pond in that video, and have wanted to make one ever since. I found a PDF of the 1996 article, available for download here.

He told me a funny story about a time that he built his Waterstone Pond on Roy Underhill’s The Woodwright Shop television program. Because the program has to be filmed all with one take, no breaks can be made for mistakes; the camera keeps rolling. Roy noticed that the joint that Frank was showing was messy, so Roy grabbed Frank’s arm and quickly yanked it around so that the close-up camera would see the nicer joint on the other side. Gotta keep up appearances!

One thing I was looking forward to seeing in Frank’s new workshop was his huge wall of molding planes (as seen in his DVDs). I’ll admit that I was sad to learn that he had sold nearly 600 molding planes after his retirement from full-time cabinet making three years ago. In his endearing Hungarian accent he asked, “why would I ever need that many molding planes?” A very practical man indeed. Still, I wouldn’t mind owning 600 molding planes.

Frank took me over to the cherry coffee table that he was finishing up for his daughter, who lives nearby. I can tell that he finds his greatest workshop-joy building heirloom quality furniture for his posterity, and he said that they love receiving the furniture. I can tell that it is furniture that will be around for his great, great, great grandchildren to inherit.

I felt honored to listen as he instructed me on how he carefully builds up his Waterlox oil finish. Frank wouldn’t let me go before having me film his dovetail demonstration. After all, “that’s what I’m known for” he said. That video will be posted next week, so subscribe or keep checking back!

Frank also wanted to show me a huge molding plane that he built for a magazine article. The editor wanted Frank to create a large molding for the story, so naturally Frank was going to use hollows & rounds to make the molding. “No” replied the editor. “With one plane”. So Frank had to build the beastly handplane. Frank insisted that we film this giant in action. I was thrilled to do so! I’ll share that video very soon as well.

I felt so fortunate to be welcomed into the dream workshop of a man who has been instrumental in preserving one of my favorite things in the whole world: traditional hand tool woodworking. Thanks Frank!



I know that I’m going to get a lot of requests for a list of Frank’s favorite tools that he mentioned, so I’ll save myself some time by listing them here:

-Lie-Nielsen No. 62 Low Angle Jack Plane
-Vintage Stanley No. 62 Low Angle Jack Plane
-Lie-Nielsen No. 4 Smoothing plane
-Vintage Stanley No. 4 Smoothing Plane
-E.C. Emmerich Wooden scrub plane (made in Germany)
-Antique “Grandma’s Tooth” Wooden Router plane
-Sliding Dovetail Plane
-Lie-Nielsen dovetail saw
-Adria dovetail saw
-Gramercy dovetail saw
-Vintage Stanley 750 bevel-edge chisels
-Marples chisels
-“Joinery Master Class” (Frank’s recent DVD that he mentioned)
-Frank’s table saw (I don’t use them anymore, but this one is cool)
-Antique plumb-bobs


-- Joshua Farnsworth - Free Traditional Hand Tool Woodworking Tutorials:

7 comments so far

View Earlextech's profile


1162 posts in 3050 days

#1 posted 08-25-2014 05:45 PM

I’ve had the pleasure of dining with Frank a couple of times. He’s a wonderful story teller and very enjoyable to hang with. My family is Hungarian so I relate to him very well. He’s the perfect combination of old world craftsmanship and new world sensibility. He first learned the rules, then figured out how to break them. At his home shop he has reverted to his origins but when you get the chance you should ask about his commercial shop “Frank’s Cabinet Shop” experience. The place where he became known as the master that he always has been. Where old school met new school. He a fascinating man.

-- Sam Hamory - The project is never finished until its "Finished"!

View WoodAndShop's profile


149 posts in 1869 days

#2 posted 08-25-2014 06:56 PM

Thanks for your nice comment Sam! Yes, when I talk with him again I’ll ask about his cabinet shop. I’ve traveled to Hungary, so we also had a nice conversation about his homeland.

-- Joshua Farnsworth - Free Traditional Hand Tool Woodworking Tutorials:

View waho6o9's profile


8637 posts in 2936 days

#3 posted 08-26-2014 04:28 AM

Thanks for sharing a very interesting blog Joshua.

I’ve read about Frank Klausz years ago in Fine Wood Working
magazines and marveled at his work, and still do…..

View WoodAndShop's profile


149 posts in 1869 days

#4 posted 08-26-2014 12:29 PM

You’re welcome Waho609.

-- Joshua Farnsworth - Free Traditional Hand Tool Woodworking Tutorials:

View CarterR's profile


86 posts in 2378 days

#5 posted 08-26-2014 01:53 PM

View helluvawreck's profile


32086 posts in 3226 days

#6 posted 08-26-2014 02:31 PM

Thanks for posting this. I enjoyed it.

helluvawreck aka Charles

-- helluvawreck aka Charles,

View WoodAndShop's profile


149 posts in 1869 days

#7 posted 08-26-2014 02:59 PM

You’re welcome Carter and Charles!

-- Joshua Farnsworth - Free Traditional Hand Tool Woodworking Tutorials:

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics