LumberJocks

WildWinds's Favorites

  • Advertise with us
View Patricelejeune's profile

Treasure Box - Series #2 - Post #16: Finished with the marquetry panels

01-05-2015 09:05 PM by Patricelejeune | 7 comments »

With those and of year year festivities, I still have been able to advance a bit this project, between making macarons with my wife for the end of the year gifts for our friends And also, after a snow fall due to a cold front coming from Canada, a little bit of playing in the snow in the mountains with my wife, like any San Diegan. I finished to put together the marquetry panels. The bone where finally dyed I inserted those last pieces in the top and sides ...

Read this entry »


View Julian's profile

Veneer Press #1: Homemade Veneer Press

10-11-2012 02:33 PM by Julian | 3 comments »

I made this simple veneer press in preparation for a project. The veneer press is similar to a couple I saw posted here on L.J. I don’t have any spare room left in the garage so I wanted a veneer press that could be easily disassembled and stored away and would not take up any floor space.

Read this entry »


View Karson's profile

My Sharpening Station Copyright 2-11-2007 Karson Morrison

02-11-2007 08:21 PM by Karson | 35 comments »

I’ve noticed some Blogs and questions about sharpening chisels and I thought I give you my experiences and what I’ve designed. I’m getting ready to teach a sharpening workshop for the Mason-Dixon Woodworkers club and I was working on my setup and techniques. I own the Tormek Sharpening System , the Makita Sharpening System . I’ve used The Scary Sharp System and I build a modified Scary Sharp setup using cast iron plates and silicon carbide granules on the coarser grits and diamond paste...

Read this entry »


View Gord Graff's profile

Traditional Featherboards...............How I make them. PICS

10-04-2007 02:30 AM by Gord Graff | 22 comments »

Hello All, Feather boards have been around in one form or another for a long time and for most woodworkers they are invaluable. It’s like having a second or third pair of hands that never get tired. Below are two methods that I’ve used to make feather boards over the years, one is a band saw method and the other is a table saw method. The feather board below is typical of what you’ll find in your local woodworking store, it does the job but we can improve on it greatly. First, I ...

Read this entry »


View rance's profile

Disposable KerfMaker

06-14-2011 08:35 AM by rance | 32 comments »

Well, yes, the Kerf Maker is a very clever jig. I have a different take on its manufacture. I see a reason to have several, NO, Wait… Why not make them DISPOSABLE? :) I had a need to use one today so why not make one. Here it is:  I used a stick of about 1/2” square pine. Yeah, Pine(or is that Poplar?). And some double sided tape. Cut the stick in half. (I’m kinda protective of my tape. Can ya tell?)  Then stick both halves together with the tape. &n...

Read this entry »


View BritBoxmaker's profile

EZ Mitre #1: Update - Using router bits

05-15-2011 08:17 PM by BritBoxmaker | 12 comments »

Since the original EZ mitre blog there have been variations added. To formalise the adding of new and/or additional methods to the technique I will add updates for now and re-release the whole thing if I ever get time. The main reason for this update is, as has often been asked, ‘can this technique be done using a table mounted router and ‘v’ groove bit ?’ Up until now I have been reticent to suggest this but I have just this week discovered router bits that are up ...

Read this entry »


View BritBoxmaker's profile

The EZ mitre technique

07-26-2010 10:55 PM by BritBoxmaker | 80 comments »

Hello all. Well I seem to have whet the appetite a bit so here goes for a ‘novel’ technique for making mitred boxes. Its a bit like making a box out of paper, like they showed you at school, using a ‘net’. Only in 3D, with wood and a tablesaw (not sissors). Well first comes the board Its made from alternating strips of Maple and Rosewood of varying thickness. I won’t bore you with the details on how to make it suffice to say that all the corners must b...

Read this entry »


View shipwright's profile

Watercolor Dye Technique #1: General Concept

01-30-2011 03:52 AM by shipwright | 6 comments »

This is the blog that I promised detailing my experiments in what I call “watercolor style” aniline dying. My sincere hope is that it will encourage some of you to jump in and help develop what I think is a huge potential of which I’ve only scratched the surface. The idea of hand dyeing pieces of inlay or marquetry came to me because I was frustrated by the limited array of colors available to me in the veneer and solid wood supply to which I have access. I was enjoying ...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com