cornhole boards #3: Cutting the plywood and 2x4s

  • Advertise with us
Blog entry by VonlederHosenschnitz posted 05-05-2016 03:18 PM 854 reads 0 times favorited 0 comments Add to Favorites Watch
« Part 2: Preparing Part 3 of cornhole boards series Part 4: Assembly »

After purchasing all the wood you need to turn it into some useful things. So to start off you need to take your 4 ft x 8 ft sheet of plywood and cut it directly in half so you have two 4×4 sheets and then cut each of those in half again and you will have the sizes you need for the tops of the board. Then you move onto the 2×4s which will be cut into 2 ft pieces and 4 ft pieces. Once all the boards are cut you are ready to assemble

0 comments so far

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics