Vip3r74's Blog

  • Advertise with us
This blog is written by Vip3r74 | 4 entries so far

Latest Entry

Thickness Drum Sander #4: Drum Assembly

07-29-2013 09:44 AM by Vip3r74 | 6 comments »

Today it time for the drum assembly. I did not go for the Velcro method for 2 reasons, to get hold of the velcro and the sandpaper where I stay is expensive and scarce. I have read from a couple of guys using it with the handfeed method that as soon as you stop moving that you get a bit of a deeper cut on that spot. I will be using normal rolls of sandpaper rolled around my drum. What I did was designing my head unit to allow me to remove two plugs that hold the sandpaper in place to allow me to change my sandpaper. I will have to cut the paper for the sides everytime though, I’m sure I can make some sort of fixture to simplify that process. Total lentgh of the drum is 46...

Read this entry »

Older Entries

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics