VillageBoy's Blog

  • Advertise with us
This blog is written by VillageBoy | 3 entries so far

Latest Entry

The Rough Lumber Chronicles- Exotics: An Odyssey of a Village Boy River Walker #3: Natural Edge Gabon Ebony Console.... Two Slabs and a 3" x 4"

09-06-2014 12:07 AM by VillageBoy | 0 comments »

So I’m working on a console table made from two slabs and 3” x 4” of Gabon Ebony. I am at the point where I need to decide on the joinery of the two legs to the table top and wondering which way to go. Should I make 16” wide tenons on the top of each leg? Should use dowels? Maybe cut 16” groove across the end grain of each leg, attach a 2” x 2” underneath the table top that will act as a tenon and glue it up? Could use some advice guys. I plan to finish the build, along with a Padauk console in the same style over the weekend, and glue up on monday or maybe Tuesday. Any input is welcome and will be greatly appreciated. I will ...

Read this entry »

Older Entries

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics