Part 1 of my final project

  • Advertise with us
Blog entry by Vaughnilla posted 03-31-2016 01:40 PM 1216 reads 0 times favorited 3 comments Add to Favorites Watch

That is my plans that I will be following for my final project. It won’t be easy but I will overcome the odds to complete this by June

3 comments so far

View dbray45's profile


3335 posts in 3386 days

#1 posted 03-31-2016 01:54 PM

Make sure you read the instructions through to the last before cutting any wood. Always cut all of your pieces about 2 inches longer than what you need and between every step pause and think about what the piece will be, where it will go and how it is connected. The reason for cutting pieces longer than the drawings, it is easier to take away and harder to put back on. If you make a mistake, you do not lose the hole piece.

Always keep your fingers more than 3” away from any blades at all times.

You will be fine and the piece will look great.

-- David in Palm Bay, FL

View NormG's profile


6501 posts in 3613 days

#2 posted 03-31-2016 11:36 PM

Great piece to do

-- Norman - I never never make a mistake, I just change the design.

View Tooch's profile


2013 posts in 2485 days

#3 posted 04-07-2016 09:37 AM

Im ready to see you start on this big guy. Lets get the 2 side sub-assemblies first, and go from there. Don’t let things like Tennis section meets interfere with your progress, you have to rise above it, vaughnilla. Rise above the hate.

-- "Well, the world needs ditch-diggers too..." - Judge Smails

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics