Lathe Tips #1: Quick changing Spindles.

  • Advertise with us
Blog entry by Cyrus Fillmore posted 12-21-2014 03:56 AM 1647 reads 0 times favorited 2 comments Add to Favorites Watch
no previous part Part 1 of Lathe Tips series no next part

Every year in Mid January I go to this little Fiber arts show and vend. I make Crochet hooks, Yarn bowls and a bunch of other stuff as well.
One of the things I make is called an Inkle Loom. They are used to weave long straps for a number of uses, Google it you’ll get the idea.
The version I make has 10 pegs on it and I am currently building 3 of them. Since driving an hour and a half to pick up 5/8 Oak dowel rod didn’t fit into my schedule I decided to turn the dowels. Thirty pieces 5 inches long (I would have turned longer ones and cut them down but don’t have a steady rest.) Now, anyone who has had to turn a lot of spindles, knows that finding centers on both ends of every piece then mounting each one and turning them is kind of a pain. And putting them in a set of pin jaws on a chuck, tightening and loosening the chuck over and over is also a time taker. So here was my solution.

Using the Pin jaws I mounted a 2X2 piece of Red Oak 3 inches long and cut a cup about 3/4 inch deep and 1-1/4 in Diameter.

Then I could set a piece into the cup run the tail stock up to it and center it by eye, And with my trusty Skew rough it and turn it leaving only a small chunk on the end, I could then cut of on the miter saw.

Its an old trick but worth posting I thought.

2 comments so far

View DIYaholic's profile


19921 posts in 3956 days

#1 posted 12-21-2014 04:16 AM

I hope my grey matter can remember this tip!!!

Thanks, for taking the time to share.
I certainly NEED all the help & tips I could get.

-- Randy-- I may not be good...but I am slow! If good things come to those who wait.... Why is procrastination a bad thing?

View ken_c's profile


338 posts in 4444 days

#2 posted 12-22-2014 12:49 AM

My first hollow vessel and part of the Christmas – ah sorry forgot I was here.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics