Lesson's Learned: By Project

  • Advertise with us
This blog is written by USCJeff | 24 entries so far

Latest Entry

Shop Built Hand Tools #10: Tablesaw Alignment Tool

09-10-2012 05:54 AM by USCJeff | 0 comments »

I posted a detailed makeup of this project in the project section: In short, the idea was to make a tool that can check the alignment of the miter slot to a fence as well as the blade to miter slot. I noticed some rip cuts binding recently and suspected alignment problems since I moved the saw around a bunch while reorganizing my shop. I don’t have a dial indicator that works right, so this was the fix. A scrap of MDF, a threaded insert with matching bolt, and calipers are all that was needed. Note, if you don’t have calipers or they are too expensive to use in this manner, they aren’t really required. They work great, bu...

Read this entry »

Older Entries

View all 24 entries »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics