LumberJocks

Table Saw Modifications

  • Advertise with us
Blog series by TrentDavis updated 04-28-2017 04:13 PM 6 parts 7886 reads 5 comments total

Part 1: Attaching a Sliding Crosscut Table without having to cut your rails

01-28-2017 03:33 PM by TrentDavis | 0 comments »

I’ve created a tutorial for attaching a SawStop sliding crosscut table to a table saw without having to cut your front or rear rails. Check it out here:http://trentdavis.net/2017/01/27/table-saw-enhancement-attaching-sliding-crosscut-table-without-cutting-down-the-rails/

Read this entry »


Part 2: Table Saw Enhancement – Attaching Extra Cast-Iron Extension Wing

01-28-2017 05:05 PM by TrentDavis | 0 comments »

I’ve created a tutorial for attaching an additional cast-iron wing to a SawStop table saw Check it out here:http://trentdavis.net/2017/01/27/table-saw-enhancement-attaching-extra-cast-iron-extension-wing/

Read this entry »


Part 3: Table Saw Enhancement – Converting Extension Table Into Router Table

01-28-2017 05:10 PM by TrentDavis | 5 comments »

I’ve created a tutorial for converting the extension table on a SawStop table saw (or any table saw with a wooden extension table) into a router table. Check it out here:http://trentdavis.net/2017/01/27/table-saw-enhancement-converting-extension-table-into-router-table/

Read this entry »


Part 4: Router Table Enclosure: Part 1 - Carcase

04-07-2017 01:37 PM by TrentDavis | 0 comments »

This is Part 1 of a tutorial for building an enclosure for the router lift I added to the extension table on a SawStop table saw. Check it out here:http://trentdavis.net/2017/04/07/table-saw-modification-router-table-enclosure-part-1/

Read this entry »


Part 5: Router Table Enclosure: Part 2 - Laminate

04-14-2017 01:31 PM by TrentDavis | 0 comments »

This is Part 2 of a tutorial for building an enclosure for the router lift I added to the extension table on a SawStop table saw. Check it out here:http://trentdavis.net/2017/04/14/table-saw-modification-router-table-enclosure-part-2-laminate/

Read this entry »


Part 6: Router Table Enclosure: Part 3 - Hardware and Electrical

04-28-2017 04:13 PM by TrentDavis | 0 comments »

This is Part 3 of a tutorial for building an enclosure for the router lift I added to the extension table on a SawStop table saw. Check it out here:http://trentdavis.net/2017/04/28/table-saw-modification-router-table-enclosure-part-3-hardware-and-electrical/

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com