This blog is written by TrentDavis | 17 entries so far |
-
SawStop Tutorials #2: Choosing a SawStop - Contractor Vs. Professional
https://www.trentdavis.net/wp/2019/01/18/choosing-a-sawstop-contractor-vs-professional/ In...
-
SawStop Tutorials #1: SawStop Brake Spacing Explained
This is the first entry in the SawStop Tutorials series.http://trentdavis.net/wp/2018/07/06/s...
-
Recording Studio Desk #5: Attaching the hardware
Here’s the next entry in the ongoing project of my recording studio desk. Part 5 is available...
-
Recording Studio Desk #4: Applying the Finish
Here’s the next entry in the ongoing project of my recording studio desk. Part 4 is available...
-
Recording Studio Desk #3: Assembling the Racks
Here’s the next entry in the ongoing project of my recording studio desk. Part 3 is available...
-
Recording Studio Desk #2: Final Shaping of the Top and Bottom
Here’s the next entry in the ongoing project of my recording studio desk. Part 2 is availa...
-
Recording Studio Desk #1: Preparing the top and bottom
I finally started construction on the desk for the recording studio in my home. I put togeth...
-
Tool Maintenance – Protecting A Cast Iron Tabletop
I created a tutorial for removing, and helping to prevent rust from cast iron tabletops. Thi...
-
Table Saw Modifications #6: Router Table Enclosure: Part 3 - Hardware and Electrical
This is Part 3 of a tutorial for building an enclosure for the router lift I added to the ext...
-
Table Saw Modifications #5: Router Table Enclosure: Part 2 - Laminate
This is Part 2 of a tutorial for building an enclosure for the router lift I added to the ext...
-
Table Saw Modifications #4: Router Table Enclosure: Part 1 - Carcase
This is Part 1 of a tutorial for building an enclosure for the router lift I added to the ext...
-
Rustic Workbench #2: Installing The Hardware
Finished my wife’s workbench. Check it out and let me know what you think or if you ha...
-
Rustic Workbench #1: Workbench: Part 6 – Finishing the benchtop
-
Pen-making on my lathe – Christmas 2016
I’ve created a walk-through on how I make pens and apply a cyanoacrylate finish. Check it ...
-
Table Saw Modifications #3: Table Saw Enhancement – Converting Extension Table Into Router Table
I’ve created a tutorial for converting the extension table on a SawStop table saw (or any tab...
-
Table Saw Modifications #2: Table Saw Enhancement – Attaching Extra Cast-Iron Extension Wing
I’ve created a tutorial for attaching an additional cast-iron wing to a SawStop table saw ...
-
Table Saw Modifications #1: Attaching a Sliding Crosscut Table without having to cut your rails
I’ve created a tutorial for attaching a SawStop sliding crosscut table to a table saw w...