Skew jig for WS3000

  • Advertise with us
Blog entry by Trakem2 posted 12-11-2015 06:03 PM 1479 reads 0 times favorited 1 comment Add to Favorites Watch

Here are some pics of the skew sharpening jig that I made for my WS3000 to sharpen the blade for my Stanley #289 plane. The block is approximately 3” x 2” x 10”. The bed angle is 30 degrees and the skew angle is 22 degrees. The block is clamped to the work surface and the blade is placed in the jig and then is slid down to the grinding wheel. I got this idea from Chris Schwarzs blog at Popular Woodworking on how to correct the skew for a plane blade.

-- The old ways worked then, and they still do today! Randy

1 comment so far

View CL810's profile


3990 posts in 3624 days

#1 posted 12-11-2015 06:19 PM

Nice! I need one of these, thanks for posting.

-- "The only limits to our realization of tomorrow will be our doubts of today." - FDR

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics