Cutting Board / Knife Block

  • Advertise with us
Blog series by Chris updated 05-15-2012 06:21 PM 2 parts 6628 reads 5 comments total

Part 1: First Post and a Quick Recap

05-07-2012 03:54 PM by Chris | 4 comments »

Well I finally got around to setting up an account on Lumber Jocks and figured I’d kick things off with a quick note about my current project. First, a little bit of a back story… A good buddy of mine moved out to LA a few months back and quickly found that abundant counter space comes at a premium. Being that I’m such a nice guy (and never sent a housewarming present…) I figured I’d try to throw something together for him. What I came up with was a combinati...

Read this entry »

Part 2: Making Progress

05-15-2012 06:21 PM by Chris | 1 comment »

It was a long week but finally had a few hours to jump into the shop and work on the knife block / cutting board. After trying to think of the best way to secure the cutting board to the knife block box I ended up going with some oak cove molding. It has enough stability to hold the cutting board in place and it also opens up the base of the box for more storage. The molding is positioned such that the cutting board will be half above and half below the top edge of the box. I really...

Read this entry »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics