Chris's Blog

  • Advertise with us
This blog is written by Chris | 3 entries so far

Latest Entry

Cutting Board / Knife Block #2: Making Progress

05-15-2012 06:21 PM by Chris | 1 comment »

It was a long week but finally had a few hours to jump into the shop and work on the knife block / cutting board. After trying to think of the best way to secure the cutting board to the knife block box I ended up going with some oak cove molding. It has enough stability to hold the cutting board in place and it also opens up the base of the box for more storage. The molding is positioned such that the cutting board will be half above and half below the top edge of the box. I really liked the idea of adding a groove in the cutting board so it could be used for steak/turkey/etc (thanks Shanem!). It just so happened that I had enough stock for a second much thicker top that would...

Read this entry »

Older Entries

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics