LumberJocks

Tom Howbridge's Blog

  • Advertise with us
This blog is written by Tom Howbridge | 13 entries so far

Latest Entry

Countersink From Screwdriver Bit

11-19-2015 08:26 PM by Tom Howbridge | 1 comment »

Using an old driver bit I made a counter sink by cutting of the ends and grinding a blunt point on one end, then I filed a flute along the ground edge, I used a cheap bit as its a lot easier to work with and sharpen but a good quality bit may hold a better edge. I found it worked really well with an impact driver a drill driver, high speed low speed, it worked quite well even for large headed screws, dry for yourself to see if you can create one just like mine or even better ! WATCH THE VIDEO here

Read this entry »

Older Entries

View all 13 entries »


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com