LumberJocks

15 Ft Power-Drifter Fishing Boat, "Tiger Lily"

  • Advertise with us
Blog series by Tomato updated 04-01-2016 03:32 PM 3 parts 5746 reads 11 comments total

Part 1: The plans are in!

01-15-2016 08:42 PM by Tomato | 5 comments »

Entry on 1/15/2016: Hi everyone! I am an avid steelhead fisherman in Southeast Michigan. The rivers down here are a little difficult to drift a float like I would prefer. It’s hard to get into a good hole due to lots of overgrowth on the banks and the majority of the river being private property. My solution is the Power-Drifter from Glen-L. It will allow me to slow my travel down the river, hotshot, fly fish, or drift with a spinning combo or centerpin. I will also get some good ...

Read this entry »


Part 2: Change of Plans and Doing a Jig

01-18-2016 04:22 PM by Tomato | 5 comments »

Entry on 1/18/2016: Watching some Disney this weekend I have come up with a name. She will be called, “Tiger Lily”! After getting some quotes from the lumber yard it occurred to me that, since I can’t get 4×10’s, I will have to scarf more than one joint to get the planking and board lengths for the 16.5 footer. This will add significant extra cost with a lot of waste. I decided to go to the 15’ version and, even though I’m losing about two feet o...

Read this entry »


Part 3: Took a break to build a work bench... check her out (Gallery)!

04-01-2016 03:32 PM by Tomato | 1 comment »

Found this at a thrift shop and restored it. (Just an old Stanley Two-tone Jack but works for now) My own knife, plane iron, and chisel sharpening system I designed. 80 to 7000 grit.

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com