Timmie's Blog

  • Advertise with us
This blog is written by Timmie | 1 entry so far

Latest Entry

Model 63, 10 inch Powermatic Table Saw #1: Table Saw Adjustment

07-11-2015 10:23 PM by Timmie | 3 comments »

I am having a difficult time “squaring up” my saw blade to the miter slots. I have loosened up all four bolts that attach the grunion to the underside of the table saw top. There seems to be almost “zero tolerance” in moving this whole carriage. I have used a crowbar as leverage and can get some movement but not enough. I have a digital read out that shows I’m off by as much as .033 of an inch. This is unacceptable. Can anyone help me? I am making a cross-cut sled and cannot go any further on it until I can get the saw blade square on the table top. I have been dealing with this problem for months. The manual does not give any written communication a...

Read this entry »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics