LumberJocks

Stickley 802 Hall Table #6: Shaping

  • Advertise with us
Blog entry by TigerTed posted 06-09-2019 10:57 PM 369 reads 0 times favorited 0 comments Add to Favorites Watch
« Part 5: Drawer Divider Part 6 of Stickley 802 Hall Table series Part 7: insides »

The front apron needed a curve. I made a trammel taking care to have even margins by the leg joints.

Rough cut on the bandsaw. The knot and ugly grain became waste. The rough cut was cleaned up with a spokeshave.

With help from my son, we glued up the case. It was a panic. Glue setup way too fast. Think I would use hide glue in the future to give more open time. It’s strong enough. Everything turned out ok but too much of a panic.



0 comments so far

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com