LumberJocks

Stickley No. 369 Slant-arm Morris Chair #6: Start on the back

  • Advertise with us
Blog entry by TigerTed posted 12-18-2018 05:48 PM 535 reads 0 times favorited 0 comments Add to Favorites Watch
« Part 5: Start to arms. Part 6 of Stickley No. 369 Slant-arm Morris Chair series Part 7: Finishing up the woodworking »

The back slats will be curved. First we need the distance between tenons. The stile of the back are milled and with locating hole assemble to the chair with a pin. A mock up straight section tenon was made.

Next we need a form to glue the back slats. Two curved forms were made with the bandsaw. Between the forms at spacers that allow us to clamp and accommodate the various slat heights. That assembly is mounted to a piece of plywood. Everything has thin foam sheet to prevent slats from bonding and to add some compliance.

Slats are made by gluing 6 1/8” veneers together. Honestly, tried to get away with using ugly wood. By the time I decided it was ugly, I made the bottom slats. Decided to use anyway because it was so much work. Don’t be cheap…



0 comments so far

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com