LumberJocks

Modern changning table with hand tools #2: Lots and lots of planing

  • Advertise with us
Blog entry by Thorbjorn88 posted 09-19-2019 03:52 PM 674 reads 0 times favorited 2 comments Add to Favorites Watch
« Part 1: The Design Part 2 of Modern changning table with hand tools series Part 3: Making the panels »

The wood from this project is walnut and it came from a Craigslist add from an older man who was moving from Tucson to Missouri. He’d had the wood sitting in his shed for a decade or so. I ended up getting it for about $2.50 a board foot. My one concession to power tools for this project is a thickness planer. I flattened one face of the rough boards with hand planes then ran the other side through the thickness planer. I then planed each edge square and parallel. Next step gluing the panels

-- Dave



2 comments so far

View Oldschoolguy's profile

Oldschoolguy

108 posts in 994 days


#1 posted 09-20-2019 12:42 PM

Hey, nice hand planing!!!!!

View Bill Berklich's profile

Bill Berklich

1188 posts in 1546 days


#2 posted 09-26-2019 01:11 PM

Sweet deal on the walnut – looking forward to seeing your progress.

-- Bill - Rochester MI

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com