LumberJocks

TheWoodRaccoon's Forum Topics

  • Advertise with us
View TheWoodRaccoon's:homeworkshopprojects (1)blog (0)reviews (0)forum topics (25)buddies (3)favorites (2)activity logWatch
02-21-2016 06:55 PM

Bandsaw blades smaller than 1/8th inch? - 13 replies

Does anybody know where to get 3/32, or even 1/16 inch bandsaw blades? Supposedly 1/16 inch blades arent made anymore, and that 3/32 is the smallest? I have a scroll saw, but i think it would be nice to have the ability to cut like a scroll saw on the bandsaw while making through cuts, if possible. Can someone tell me where to get some if the...

02-19-2016 01:54 AM

Question about the tracking arm on a Delta 14" bandsaw - 4 replies

Today I got a Powermatic 14” upper bandsaw wheel to replace the broken stock wheel on my Delta 14” bandsaw. The wheel fits, and is perfectly round and balanced. But, i realised it is smaller in diameter than the lower wheel. by a good 5/16inch. Therefore the blade is not perpendicular to the table, and scrapes the left side blade gua...

02-18-2016 12:43 AM

This guy stacked 2 riser blocks on his saw! - 5 replies

I would have posted this in the “craigslist posters have gone nuts” thread, but i think this is so crazy that everybody should see it: http://jerseyshore.craigslist.org/tls/5441895397.html That’s nuts! Damn creative, but nuts!!

02-12-2016 06:26 PM

Some of my work! - 11 replies

I’ve been here for awhile, but i have yet to show anything i’ve made. I haven’t actually started or finished any projects recently, so i’d like to show some work i did in the past! These are handmade slingshots/catpults, basically the only type of woodworking project I’ve made, aside from a workbench, and some makes...

02-09-2016 03:48 AM

Arcade MFG. Co vintage Scroll saw, worth it? - 0 replies

I saw this cool little scroll saw on eBay. Does anybody know anything about it, or seen one before? For $30, I think it’d make a cool restoration project. I’ll check OWWM, but I’m hoping someone who knows how to navigate that site better might help? http://m.ebay.com/itm/Vintage-ARCADE-MFG-POWER-TOOLS-USA-Cast-Iron-Band-Saw-...

02-09-2016 03:23 AM

Very unusual bandsaw, round table! - 2 replies

I was browsing eBay, and I saw this really cool bandsaw that seems really unique! Anybody seen one before? http://m.ebay.com/itm/Vintage-Bandsaw-8-Antique-Brass-Guide-Round-Table-Collectible-Old-Unmarked-Cool-/172083551932?nav=WATCHING_ACTIVE

02-02-2016 02:10 AM

Strange Vintage Vise - 16 replies

I was at my grandfather’s house today, and he was showing me some of his vintage tools that he got from his father, who got them from his father. He was wondering what some of them were worth, so I told him I’d try and find out. Can anybody help?There was this really cool vise, but I have no idea what it is, or what it’s worth:...

01-31-2016 01:41 AM

Looking for neighbors, anybody live in Brooklyn NY? - 5 replies

I’m a member of a few other forums of different types, but it seems everybody lives so far away. I’ve always kept my eyes open for fellow enthusiasts who might live nearby, it’d be nice to have some neighbors! I live in Flatbush, Brooklyn NY zip 11229. Anybody? It’d be funny if someone here lived down the block lol!

01-24-2016 11:19 PM

Delta/Rockwell 14" bandsaw wheels - 0 replies

I bought these Delta/Rockwell bandsaw wheels to replace the damaged ones on my 1999 US made Delta 14” BS. Does anyone know if these wheels use the 6202 bearings? I read that the earlier wheels used different bearings, but im not sure how old these wheels are. I was hoping someone could help? EDIT: Forgot to post a link for the pictures....

01-13-2016 12:55 PM

Anybody have a General international 90-125 M1 14" BS? Or a PWBS 14CS? - 6 replies

(If you know me, your’e probably thinking: “Didn’t this kid just get a Delta 14” saw? Why is he asking about other saws?” A good question. I’m having a problem with it. I took off the upper wheel of my Delta to try and find the source of some wobble, which turned out to be a large crack running across four spo...

01-10-2016 08:00 PM

Whats a good Miter Gauge? - 8 replies

I’m looking for a miter gauge for my Delta 14” band saw. I measured the slot which came out to 3\8×3\4 inch. Im not looking to spend $100, but I don’t want a chintzy piece of wobbly plastic either. Does anybody know what some good options are, and where I should get? Something sturdy, that fits well, and will work for most...

01-08-2016 07:43 PM

Surprising Results with Stock Delta 1/2 inch 6tpi BS blade - 1 reply

Last week, I got my NOS Delta 14” bandsaw, along with some extra Delta stock blades the seller threw in, one of which is a 1/2in 6tpi. The blade had a lot of dried and sticky grease on it from the packaging, and it took 10min to open! After cleaning it, I noticed a meat hook abortion of a tooth right where the blade is welded. Ground that ...

01-07-2016 10:32 PM

Routers are scary! - 45 replies

I was using my 2 1/4 HP router with a straightedge and a 1/4 straight bit to cut some ply wood to size for a mobile base I’m designing for my bandsaw. I was taking it slow, making two passes to get through the 3/4in ply. 1/2 way through my second pass, it stopped cutting, and I took a look to see why. My eyes enlarged to the size of dinner...

01-05-2016 06:26 PM

Need Parts for Jorgenson 3" hold down clamp - 8 replies

Along with a bunch of other free tools, I was given a Jorgenson 3 inch cast-iron hold down clamp, it even came with the original product brochure! Only problem is, it seems to be missing the mechanism that does the “holdy-downy” part…Anybody know what I’m missing, and or how to fix it? I checked the brochure for an idea, ...

01-04-2016 03:02 AM

Shop Tour! - 2 replies

Hey guys! I joined a couple months ago, and its been awesome! Although, i feel i’ve been taking more than i’ve been giving. I started 3 threads just about a bandsaw i wanted! So, I thought i’d share a shop tour video! I don’t know how many guys here will be interested in watching it, as i dont really have any serious equi...

01-01-2016 01:55 PM

Delta Bandsaw Bearings Thread - 21 replies

(im sort of new to this forum, so I’m not sure if I’m violating any rules with this thread. If I am, I apologize, and will delete it.) There seems to be a lot of different opinions on bearings, like what exactly to get, where to get, when to replace, etc. I tried to look it up myself, but it got really confusing really quick. Ther...

12-31-2015 06:23 PM

What's This on my Delta 14" Bandsaw? - 14 replies

I was admiring my newest shop acquisition, an nos Delta 14” bandsaw, when I noticed something on the rear next to the pulley guard. It looks like a place for an accesory? Maybe for some pulleys to vary the speed? Does anybody know? Paging MrUnix ! :)

12-27-2015 04:11 AM

Anybody have a Delta 28-280 w/enclosed base? I need some specs - 5 replies

I ordered an NOS Delta 28-280 14 inch bandsaw last week, and its on the way. I want to build my own mobile base for it, and i would like to have it ready for when the saw arrives. Can somebody give me the dimensions of the footprint of the enclosed base/stand? I looked at the “Overall Dimensions” in the saws online manual, but it did...

12-17-2015 02:55 AM

Delta Platinum Edition Band saw any good? - 6 replies

I found a Delta Platinum edition 14” band saw for sale near me. Are they any good compared to the regular 28-275-280 series? Are they made in the US? It looks to be in great shape.

12-05-2015 11:15 PM

My newest plane: Stanley Low angle G12-060 Block plane - 2 replies

I recently got this little gem on eBay for under $20! This is a low angle bevel-up plane, and it has an adjustable throat. It’s made in England, and in beautiful shape. It just needs a little cleaning and sharpening! I have little to no experience using planes, but when I see them for a good price, I get them for future use when I have the...

1 2 next »
25 topics


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com