LumberJocks

Everything's a Chisel

  • Advertise with us
This blog is written by TheRiflesSpiral | 8 entries so far

Latest Entry

Mongo: my first real workbench #8: Joinery: working out the legs

05-10-2017 02:58 PM by TheRiflesSpiral | 2 comments »

Mongo’s legs are by far the most complex pieces, except perhaps the vices. They are responsible, obviously, for holding up the table surface but also for tying in the aprons and supporting the lower shelf. Clearances have to be made for the outermost ribs and bonus: there are no 90° cuts! Yay! But this is why I made the gauge in update 6 and it was used extensively. First step was to establish the top of the tenon at the correct angle. This is a through cut but I don’t have a timber saw so I ended up coming at it from both sides with my circular saw. That’s never perfect but no matter, the imperfection will be planed off when I surface the table later. The n...

Read this entry »

Older Entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com