• Advertise with us
Blog series by Tango updated 05-23-2019 01:00 AM 3 parts 5505 reads 21 comments total

Part 1: Chair disassembled and details inspection

05-19-2019 09:34 PM by Tango | 4 comments »


Read this entry »

Part 2: Dimensions/schematics

05-21-2019 02:28 AM by Tango | 15 comments »

Here are dimensions taken from the real Z-Chair. Dimensions are in mm for better accuracy.

Read this entry »

Part 3: Preparation for refinish

05-23-2019 01:00 AM by Tango | 2 comments »

Removal of old finish was a real challenge. Tried with stripping liquid, no real results and very slow. Then with lacquer thinner…meh. Also denatured Alcohol but not happy.Finally, I opted to scrape all old finish with a card scraper and sand down to bare wood. I don’t know what type of finish they used back then but was impervious to all I applied. !!

Read this entry »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics