This blog is written by Tag84 | 22 entries so far |
-
Tumbling Bowl video
Hey everyone,I recently finished a Tumbling bowl http://lumberjocks.com/projects/101433#comment-1...
-
Making a segmented box
Hi everyone, i made a video of making a segmented box.I have lots of scrap pieces from previous p...
-
Cherry endgrain board
A video of making a fairly simple cherry board/block.Happy holidays and a great 2014 to all here ...
-
Making simple bench dogs
I almost finished my workbench, and made a video of making the benchdogs Hope you enjoy it!...
-
3d endgrain cutting board
A video about making a 3d endgrain tumbling cutting board.Walnut, cherry and Maple.Hope you enjoy...
-
Making a simple box
Hi everyone, I made a video of building a low budget box without powertools. http://www.you...
-
Box showreel
Hi everyone, I made a little showreel of my boxes.1 Box is missing, that is the first one i bu...
-
Carving a wildman
Hi everyone, I did a few testcuts with the Arbortech turbo plane blade, and wanted to do a big...
-
Fixing the knot
Hi everyone! I decided to do a short video on knot repairing.I used it on my table, and itR...
-
Andrius & Thomas shop #5: finished clamp rack
I recently finished our clamp rack.Held together with alot of screws and glue.I cut out the upper...
-
Andrius & Thomas shop #4: Clamp rack
I started building a clamp storage cabinet.For the Bessey’s this seems to work really well....
-
3d tumbling board #1: 3d tumbling board
Hi guys This is a commision i’m working on from a client (unknown online...
-
Andrius & Thomas shop #3: shop tour
Hi everyone, I was in the woodshop today and decided to take some pictures. Andrius :http:...
-
ironing veneer tryout
“Hi everyone, made a video of veneering with the iron heat method.I found out the hard w...
-
woodworking tips #2: making simple dustcollector air valves
Hi Lumberjockers, made a new video of making some ease valves from mdf.I quess it’s noth...
-
Andrius & Thomas shop #2: shop update; routerlift and homemade tablesaw
..
-
lid medallion #1: medallion
Hi lumberjocks”! I made a video of a part of my box i build 5 months ago. I finally f...
-
Andrius & Thomas shop #1: trying to build cheap machines
Hi Lumberjocks.For about 2 months i’ve been sharing a workshop with Andrius Sta, who i met ...
-
woodworking tips #1: woodworking tip #1 preventing a tearout
short idea http://www.youtube.com/watch?v=i1lSNu6S0Yc&hd=1
-
my story
Inspired by Charles Dearing:) I grew up in Nieuwegein, afraid nobody here’s able to pron...
-
Tags shop #1: My workshop
Specially for you my dear friend Steliart!It took me 3 hours to clean the mess up, but here it is...
-
Pine/Oak sidetable #1: sidetable from leftovers