Sunburned's Forum Topics

  • Advertise with us
View Sunburned's:homeworkshopprojects (17)blog (0)reviews (0)forum topics (5)buddies (0)favorites (0)activity logWatch
07-02-2020 01:36 AM

CA Finish on a Pen leaving pits and imperfections. - 4 replies

Hey All, I have been making pens for about a year now and i have recently been having issues with my CA finishes. They are just not coming out as smooth as usual. There are pits and imperfections no matter how much micromesh sanding i do. I have been: - turning my pen - sanding in 5 stages from 150-600 grit - Applying 5 coats of...

03-09-2019 10:11 PM

Roughing Gouge - 10 replies

Hey all. I recently got a small lathe and am loving it. I have turned several pens and a magic wand, but the starter turning tool set I got I am already outgrowing. Specifically the roughing gouge as that is what i am using 90% of the time. I was hoping I could get some advice on a good roughing gouge to get and an approximate price range o...

02-21-2017 04:08 AM

How to spread epoxy - 4 replies

Hey all,So i have been using some epoxy for finishing lately. I have been spreading it with one of those cheap foam brushes and using a torch for popping the bubbles. I have noticed that there are some spots that are not getting coverage. I am guessing i have to use a little more epoxy but also the method of spreading it has to be better. ...

02-12-2017 04:11 PM

Finish over wood burn - 3 replies

Hey All,I am making another beer flight and decided to try a little woodburning. Nothing crazy, i just took a butane torch to the piece when it was done to char it a bit. Does anyone have any suggestions for a finish on a burned piece to seal it up. In this case i would also want to keep ash from rubbing of on peoples hands. The wood is popl...

12-27-2016 01:48 PM

Drill Press - 25 replies

Hey All,I have been doing some novice woodworking for a few years now and it has become clear that i need a drill press. I don’t have any knowledge of drill presses or the power required and it seems like more than most other tools there is a huge price/quality range. I am going to be using it almost exclusively on wood (zero or very lit...

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics