LumberJocks

Howard 's Blog

  • Advertise with us
This blog is written by Howard | 1 entry so far

Latest Entry

Scratch Paper box build system

09-18-2015 05:23 PM by Howard | 1 comment »

Scratch Paper Boxes: I use 1/4” plywood with a Maple finish. It has a non-wood center and Maple veneer on both sides. Available in my area thru Menards.A 4’ x 8’ sheet cut properly will yield 48 boxes. I have included a scan of the instructions to myself for cutting down the 4 ‘ x 8’ sheet. Finished Sizes: Cut the bottom FIRST…. 4 3/8” X 5 5/8”…. All other pieces are then fit to the bottom Cut Out Section = 1 3/4” x 4 7/8”Front of Box = 1 3/4” x 4 3/8”Sides of Box = 1 3/4” x 5 7/8”Top of Box = 2 1/4” x 4 7/8” I have also included scans of the finished box to show you which sections overlap. I cut all the pieces at least a 1/16” larger than needed… then as I glue them ...

Read this entry »


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com