How to cut hexagons on a table saw

  • Advertise with us
Blog entry by StLouisWoodworker posted 07-10-2011 02:59 AM 6526 reads 3 times favorited 3 comments Add to Favorites Watch

I wrote a note in Adobe Acrobat (.pdf) format explaining a way to cut hexagons on a table saw. It is too long to include here, so I have posted it on my website at Cut Hexagons. Cheers…..... D. Snyder

-- Don Snyder (38.6N, 90.3W)

3 comments so far

View Ken90712's profile


17829 posts in 3823 days

#1 posted 07-10-2011 05:22 PM

What a great post well done great info. Thx

-- Ken, "Everyday above ground is a good day!"

View Kirk Evans's profile

Kirk Evans

33 posts in 2588 days

#2 posted 12-10-2013 03:35 AM

thank you very much for posting this info, I am making a settlers of catan game, and was pulling my hair out thx again

View StLouisWoodworker's profile


67 posts in 4611 days

#3 posted 12-11-2013 02:22 AM

Soylentgreen—thanks for your note. What is a ‘settlers of catan game’? I’ll be interested to see a picture once you finish it. If it requires making a large number of hexagons, you might consider the pattern following method I describe here: Whichever method you use, do it safely. I wish you success. I’ll be interested in a picture of your project.

-- Don Snyder (38.6N, 90.3W)

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics