Cutting a Triangular Obelisk

  • Advertise with us
Blog series by Jim Jakosh updated 09-14-2012 01:27 PM 1 part 3919 reads 10 comments total

Part 1: Cutting a Triangular Obelsik

09-14-2012 01:27 PM by Jim Jakosh | 10 comments »

Lizzardhead, this one’s for you!!Dave once asked me if I could make a 3 sided obelisk. I have been thinking about it and I cut a scrap of spalted beech cut to a triangular shape and set it under the bench while I thought about how to hold it. I came up with this method to safely cut the triangular piece to the center point. I made an L shaped support from scraps and then fastened the bottom of the triangle to it with 2 screws.I first marked off the center of the triangle on the top a...

Read this entry »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics