Sifting Filler Dust

  • Advertise with us
Blog series by Jim Jakosh updated 08-09-2011 06:39 PM 1 part 9898 reads 4 comments total

Part 1: Sifting Filler Dust

08-09-2011 06:39 PM by Jim Jakosh | 4 comments »

I have been collecting dust from various woods to use for a filler with epoxy. So far, I have been running it through a piece of screen material but that made the filler a bit coarse. Recently I collected a lot strictly from a sanding operation that was a lot finer and mixed much better with the epoxy so I started looking for a finer material to make finer dust off the wood lathe. The choice was 150 grit Abranet sand paper. Boy did that do the job. I’m sharing this with everyone in cas...

Read this entry »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics